User manual BARTSCHER A190041

[. . . ] 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Important safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Supplied accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Bars may Cinema 14:9* appear on the top and bottom with some programmes. * The items will be diplayed in ATV/DTV/SAT mode. Item (for HD [High-Definition] signals) Displays with an overscan image. Displays with an underscan image only when receiving a 720p signal. Displays with the High-Definition image Underscan adjusted optimally. Noise may appear on the edge of the screen with some programmes. Displays an image with the same Dot by Dot number of pixels on the screen when receiving 1080i/1080p signals only. Selecting the WSS picture size automatically Option WSS The “WSS” allows the TV to switch automatically among the different picture size. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “WSS”. Setup Option Option for view 3D setup AQUOS LINK setup Terminal setting NOTE • Use “Wide mode” if an image does not switch to the appropriate picture size. When the broadcast signal contains no “WSS” information, the function will not work even if enabled. • This function is available for 3D images converted from 2D images or normal 2D images. Selecting the WSS picture size manually Option Selecting the picture size manually Option 4:3 mode The “WSS” signal has 4:3 auto-switching that allows you to select between “Normal” and “Full”. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “4:3 mode”. Item Normal range keeping 4:3 or 16:9 aspect ratio. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Headphone/ Audio out select”. Headphone Audio out Item Output audio through headphones. Output audio through an A/V receiver or surround audio controller. • This function does not work when “Change audio output device” (Page 30) is set to “By AQUOS audio SP” or “Headphone/Audio out select” is set to “Audio out”. • Regarding the volume adjustment when “Dual” is set: − Adjust the speaker volume with the i+/- buttons on the remote control unit. − Adjust the headphone volume with the i+/buttons on the TV. − The headphone volume is not muted even by pressing e (Mute) button on the remote control unit. • When not using the headphones: − Audio outputs from the speakers regardless of the settings. Option Option Programme title display This function allows you to display programme information such as the title and airtime by tuning a channel. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Programme title display”. NOTE • This function is available only when the DTV/SAT mode is selected. CAUTION • This terminal is also used for headphones. Reduce the volume before using headphones. Overwhelming sound may damage your hearing. Colour system You can change the colour system to one that is compatible with the image on the screen. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Colour system”. Adjusting image position Option Position For adjusting a picture’s horizontal and vertical position. Go to “HOME” > “TV Menu” > “Setup” > “Option” > “Screen effect” > “Position”. Item Centres the image by moving it to the left or right. [. . . ] • Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings. • Wireless LAN USB adapter (WN8522D 7-JU) is Peripheral Device for TV and supports WEP64, WEP128, TKIP and AES encryptions. • Using a wireless LAN adapter other than the supplied BARTSCHER wireless LAN adapter may result in radio communications that do not comply with regulations on radio communications. Therefore, do not use a wireless LAN adapter other than the supplied BARTSCHER wireless LAN adapter. 73 Appendix Environmental specifications Item I On-mode (W) (in home-mode) J Energy-Save-Mode (W) K Standby-Mode (W) L Off Mode (W) MAIN POWER switch M Annual Energy Consumption (kWh) Annual Energy Consumption Advanced M Energy-Save-Mode (kWh) I J K L M Mounting the TV on a wall 87 W • This TV should be mounted on a wall only with a BARTSCHER wall mount bracket (Page 4). [. . . ]