User manual BARTSCHER A200052-078

[. . . ] Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted. In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the mains plug and fit an appropriate type. DANGER: The fuse from the cut-off plug should be removed and the cut-off plug destroyed immedi­ ately and disposed of in a safe manner. [. . . ] The function for correcting trapezoidal distortion is called Keystone Correction. Note • The Keystone Correction can be adjusted up to an angle of approximately ±40 degrees and the screen can also be set up to an angle of approximately ±40 degrees (When the Resize mode is set to “NORMAL” (see page 30)). Adjustment buttons (P/R/O/Q) RETURN button KEYSTONE button 1 Press KEYSTONE to enter the Keystone Correction mode. On-screen display (Keystone Correction mode) KEYSTONE ADJUST 0 END 2 Press P/Q or O/R to adjust the Keystone Correction. Shrinks upper side. (Move the slide bar in the + direction. ) Note • To return to the default setting, press RETURN while the on-screen display of the Keystone Correction mode is on the screen. Shrinks lower side. (Move the slide bar in the - direction. ) 3 Press KEYSTONE. •  The on-screen display of the Keystone Correction mode will disappear. Info • While adjusting the image using Keystone Correction, straight lines and the edges of the image may appear jagged. 28 Switching the Input Mode Select the appropriate Input mode for the connected equipment. Press INPUT P/R to display the INPUT list. When you select HDMI input, use O/Q to select the audio input terminal (HDMI or AUDIO). VOL +/– (Volume) buttons INPUT buttons AV MUTE button O/Q buttons Adjusting the Volume Press VOL +/– on the remote control or –O/Q+ on the projector to adjust the volume. On-screen display Note • Pressing VOL–/–O will lower the volume. • Pressing VOL+/Q+ will raise the volume. Basic Operation Displaying the Black Screen and Turning Off the Sound Temporarily Press AV MUTE on the remote control to temporarily display a black screen and turn off the sound. Note • Pressing AV MUTE again will turn the projected image back on. On-screen display 29 Image Projection (Continued) Resize Mode This function allows you to modify or customize the Resize mode to enhance the input image. Depending on the input signal, you can choose a desired image. Press RESIZE. • See page 47 for setting on menu screen. COMPUTER [PG-LW3000/PG-LW3500] NORMAL SVGA (800 × 600) 4:3 aspect ratio XGA (1024 × 768) SXGA (1152 × 864) SXGA+ (1400 × 1050) SXGA (1280 × 1024) 1280 × 720 Other aspect ratios 1360 × 768 1366 × 768 1280 × 768 1280 × 800 Input signal Computer Resolution XGA and below 1000 × 800 1280 × 720 1280 × 722 1280 × 720 1280 × 768 1280 × 800 — 1280 × 800 1068 × 800 FULL NATIVE 800 × 600 1024 × 768 1152 × 864 1400 × 1050 1280 × 1024 — 1360 × 768 1366 × 768 — RESIZE button 16:9 1280 × 720 — 1280 × 720 Image type NORMAL Output screen image FULL NATIVE 16:9 *1 *3 Resolution higher than XGA 4:3 aspect ratio *1 SXGA (1280 × 1024) 5:4 aspect ratio 1280 × 720 16:9 aspect ratio 1360 × 768 1366 × 768 *1 —*2 —*2 16:9 aspect ratio *1 *1 1280 × 768 15:9 aspect ratio 1280 × 800 16:10 aspect ratio : Cutout area on which images cannot be projected : Area where the signals are off screen *1 The Image Shift function can be used for these images. —*2 —*2 *1 30 VIDEO/DTV [PG-LW3000/PG-LW3500] Input signal Video/DTV Image type NORMAL Output screen image AREA ZOOM V-STRETCH 16:9 *1 4:3 aspect ratio 480I, 480P, 576I, 576P, NTSC, PAL, SECAM *1 Squeeze *1 Letter box *1 720P, 1035I, 1080I, 1080P 16:9 aspect ratio *1 16:9 aspect ratio *1 16:9 aspect ratio 540P 16:9 aspect ratio (4:3 aspect ratio in 16:9) *1 —*2 Basic Operation : Cutout area on which images cannot be projected : Area on which the image is not included in the original signals *1 The Image Shift function can be used for these images. *2 Same as NORMAL mode. About Copyrights • When using the Resize function to select an image size with a different aspect ratio to a TV program or video image, the image will look different from its original appearance. Keep this in mind while choosing an image size. Setting [On/Off] Page 43 C. M. S. Page 39 Page 43 Film Mode Page 44 DNR Auto Off Level 1 Level 2 Level 3 Page 44 Eco+Quiet [On/Off] Page 44 Reset C. M. S. -Hue R Y G C B M Reset -30 -30 -30 -30 -30 -30 +30 +30 +30 +30 +30 +30 Page 43 C. M. S. -Saturation Page 43 C. M. S. -Value Page 43 Reset Return 36 “Signal adjustment (SIG-ADJ)” menu Main menu SIG-ADJ Clock Phase H-Pos V-Pos Reset -150 -30 -150 -60 +150 +30 +150 +60 “Screen adjustment (SCR-ADJ)” menu Main menu SCR - ADJ Resize Sub menu Sub menu Page 45 Page 47 Page 47 Image Shift -40 ~ +40 (PG-LW3000/LW3500) -96 ~ +96 (A200052-078/LX3500) Page 45 Resolution Page 47 Keystone -80 +80 Normal Full Native Area Zoom V-Stretch Border (A200052-078/LX3500) 16:9 Page 45 Signal Type Page 47 Auto RGB YPbPr Auto Standard Enhanced Auto PAL SECAM NTSC4. 43 NTSC3. 58 PAL-M PAL-N PAL-60 0 IRE 7. 5 IRE Overscan [On/Off] Page 45 Dynamic Range Page 48 OSD Display [On/Off] Page 45 Video System Page 48 Closed Caption Page 46 Page 48 Background Off CC1 CC2 Logo Blue None Page 49 Setup Guide [On/Off] Video Setup Page 49 PRJ Mode Page 46 Signal Info Page 49 Wall Color Page 46 Front Ceiling + Front Rear Ceiling + Rear Off Blackboard Whiteboard Green Yellow green Yellow Orange Pink Purple Blue Greenish blue English Deutsch Español Nederlands Français Italiano Svenska Português polski Magyar Türkçe Ti ng Vi t Page 49 Language Page 49 37 Useful Features Menu Items (Continued) “Projector adjustment (PRJ-ADJ1/2)” menu Main menu PRJ-ADJ1 Auto Sync [On/Off] “Network” menu Main menu Network Password [Enable/Disable] Sub menu Page 50 Page 50 Auto Power Off [On/Off] Page 54 Page 54 DHCP Client [On/Off] Page 50 Auto Restart [On/Off] Page 55 TCP/IP Page 50 Speaker [On/Off] Page 50 Fan Mode Page 55 Reset Network Setting Page 50 System Lock [Enable/Disable] Normal High Page 55 Restart Network Page 55 IP Address Page 51 Keylock [On/Off] Page 56 MAC Address Page 52 Main menu PRJ-ADJ2 Quick Start Menu [On/Off] Page 56 Projector Sub menu Page 56 Link Page 50 Page 53 COMPUTER2 Select Page 56 Input Monitor Output Input Search Audio Mute Image Shift Signal Info Quick Start Eco Page 55 FUNCTION Button Page 53 STANDBY Mode Page 53 STANDBY Audio Out [On/Off] Page 56 DLP® LinkTM [On/Off] Page 53 DLP® LinkTM Invert Page 53 All Reset Page 53 Lamp Timer (Life) Page 53 38 Using the Menu Screen Select from the Quick Start Menu, which is a collection of the most frequently used functions, or the Complete Menu, which enables advanced settings and adjustments. Adjustment buttons (P/R/O/Q) ENTER button MENU button MENU button ENTER button Adjustment buttons (P/R/O/Q) • Press RETURN to return to the previous screen when the menu is displayed. RETURN button Menu Selections (Quick Start Menu) • This operation can also be performed by using the buttons on the projector. 1 2 Press MENU. Example Quick Start Menu Input Search Start Resolution Resize Keystone Eco+Quiet Language Information 0 Off English Go To Complete Menu… 1024×768 Normal • The “Quick Start Menu” screen for the selected Input mode is displayed. Press P or R to select the desired item, then press ENTER. Press P/R/O/Q to adjust the item selected, then press ENTER. Useful Features 3 Info • To display the advanced settings and adjustments, select “Go To Complete Menu”. Press ENTER to display the Complete Menu screen. • If you do not want to display the Quick Start Menu, set “Go To Complete Menu” - “PRJ-ADJ2” - “Quick Start Menu” to “Off”. (See page 53. ) SEL. /ADJ. ENTER END 39 Using the Menu Screen (Continued) Quick Start Menu The following items can be configured on the Quick Start Menu. Selectable items Input Search Start Resolution Description Automatically searches for and switches to the appropriate Input mode. Pressing an operation button during input searching cancels the search. Use this function when the image and screen size do not match with the resolution selected automatically. Use this function to stretch the image vertically or horizontally or when the edges of the image cannot be seen. (See page 47. ) Corrects the keystone distortion of projected images. Use this function to correct the trapezoidal distortion of images caused when projecting images at an angle to the screen. (See page 47. ) When set to “On”, this function reduces the cooling fan noise and power consumption, thereby prolonging the operating life of the lamp. [. . . ] –– Block the light or turn it off. High intensity lighting can interfere with communication between the 3D LCD shutter glasses and the screen resulting in some flicker. • Check whether two or more projectors are projecting 3D images at the same time. –– Use only one projector at a time. [. . . ]