User manual BAUER C1 C2 SUPER 8

[. . . ] Ignoring the operating and maintenance instructions can lead to severe injury or in serious cases even death. We reserve the right to make changes to the technology of our compressors as well as to this accompanying documentation in accordance to technical progress. Edition January 2005 © 2005 BAUER Kompressoren GmbH, Munich All rights reserved. i Operator's Manual TABLE OF CONTENTS 1. SAFETY REGULATIONS (EC; partly Germany, only) . GENERAL INSTRUCTIONS FOR FILTER MAINTENANCE . [. . . ] An O--ring is provided for self--sealing due to internal overpressure. Compressed air tank filling valves for a pressure in excess of 200 bar are standardized (DIN 477, sheet 5) and connectors for 200 and 300 bar are different and cannot be mixed up. To ensure safe air tank removal after filling, the valve has an integral venting bore. Therefore always close tank valve first before closing filling valve. During filling procedure bottles will warm up due to recompression. After removing, allow to cool down, bottles may then be reconnected and topped up to the respective maximum filling pressure (max. allowed filling overpressure at 15 °C). Intake air quality At routine tests, CO2 values beyond the permissible values are noted from time to time. Closer investigations often show that the compressed air is taken from rooms in which one or more persons are working. At insufficient ventilation, the CO2 value in the surrounding air can increase quite fast because of the exhaling of CO2. CO2 values from 1, 000 to 5, 000 ppmv in workrooms are not unusual (MAK--value (max. inlet pressure 420 bar Secondary pressure 0. 1 to 280 bar (range of adjustment) Temperature range --10 °C to +100 °C Normal delivery 32 m3. A 20 mm particle filter is installed at the pressure reducer inlet. 26 Operator's Manual 3. 7. 6. -Connecting the bottles Connect air bottle to filling valve (see Fig. 20). NOTE On models of 300 bar rated filling pressure do not attach bottles unless rated for this presssure (note pressure stamped on tank neck). -Air bottles with international filling connector can be connected with filling adaptor (part no. 08487--635) to the German filling connector or with filling adapter (part no. 03147--635) directly to the filling hose (see Fig. 19 Connecting air bottle . Fig. 20 International filling connector NOTE The international connector is not permitted in the Federal Republic of Germany. In other countries it is allowed only for pressures up to 200 bar (2, 850 psi). This filling connector cannot be used on 300 bar (4, 350 psi) models due to constructive measures. Fig. [. . . ] When using any of the oils listed below, please follow the oil change intervals and the oil filling level described for the equivalent BAUER compressor oil in the instruction manual of your unit. Oil type Brand name Designation Type A N Breathing Nitrox air Use I Industrial air G Helium, Argon C CNG GI Nitrogen Ambient temperature +5 . . . +45 °C Special Compressor oil Part no. N26303 a) b) M S S S M S S S M S Special Compressor oil Part no. N19745 b) Special Compressor oil Part no. [. . . ]