User manual BAZOO 23227 QUICK INSTALLATION GUIDE

[. . . ] _ Don't use this product in dusty or humid environment _ Please avoid dropping this product heavily. Fixed Lens You don't have to adjust the focus. The effective image distance is from 30cm to infinity. Support Neck The support neck can be turned forward & backward, left & right to adjust the position. [. . . ] 0 port , it will be installed automatically by Windows XP , Vista or Mac OS10. Windows Properly installed webcam can be found in your Explorer (See red marked device). After right click on this device, a preview window of the webcam can be opened. By clicking on "Take new picture" you can save a snapshot on your computer. Please refer to instructions of your preferred software, how to use and setup video devices such as webcams. If you want to use additional functions like "Face Tracking" or "Digital Zoom" you have to install the software package, which is delivered together with this webcam. Before installation, you need to connect the , , NANO XS" webcam to your computer first, otherwise the installation is not allowed, and the warning message is shown as follows: You can update driver for advanced video filter setting as below Insert the Installation CD into CD-ROM drive. Window XP users can use the built-in audio directly and then set up: Devices USB 2. Note: When you have recorded an audio/video file with , , NANO XS" in your computer, please rename the recorded file. Otherwise, the existing old file may be replaced a new recorded one. Step 1: Select a contact and click the call icon (green button). Step 2: Once you are connected, click "Start My Video". Your friend can also do the same on his/her computer. Step 3: After your friend accepts the request, you'll be connected. Step 2: Click the "Video" tab, then click "Start Call". After your friend accepts this request, you'll be connected. Installing: Step 1 Connect the , , NANO XS" webcam to the cradle Step 2 Plug the USB connector into the USB port on your computer IF you are unable to see the image: Check if the imaging device shows error or not. Change another USB Port to test (proposes connecting to the host computer directly, don't use HUB) Check if the "preview" function has been chosen. 0 port Blurry image: The product is pre-set to match the power frequency (50Hz or 60Hz) for your countries/regions. However, if there is blurry image occurred, please check whether you need to change the pre-set frequency. [. . . ] However, if there is blurry image occurred, please check whether you need to change the pre-set frequency. Please choose the correct frequency of power source environment or video output signal system. Because of the USB port management of your PC, if you change the , , NANO XS" webcam to another USB port, you need to reset all functions. Col de support Le col de support peut être tourné vers l'avant et l'arrière, à gauche et à droite pour ajuster la position. [. . . ]