User manual BAZOO 23694

[. . . ] connecting the headset to a Bluetooth transmitter (mobile phone , USB dongle , etc. ) Ensure that your mobile phone, PDA, etc. [. . . ] Thereafter connect the headset with your mobile phone as described above. Reactivate the computer's Bluetooth transmitter, which then automatically reconnects with the headset. Note: after successfully connecting both devices, all three units are "acquainted, " so that the pairing process must not be repeated. Adjusting the headset Headband can be adjusted on both sides for optimum comfort. To ensure correct stereo listening, please note the "L" indicating the left channel and the "R" indicating the right channel. Telephone usage using the headset Function Headset status/mode Select language Standby Redial Increase volume Decrease volume Answer call Refuse call End call Switch between headset and telephone Mute microphone Activate microphone Standby Successful phone connection Successful phone connection Telephone ring Telephone ring Successful phone connection Successful phone connection Successful phone connection Successful phone connection Command Press and hold the multifunction key for 2 seconds until a tone sounds Press the multifunction key twice in succession Press the "+" key Press the "-" key Briefly press the multifunction key Press and hold the multifunction key for 2 seconds Briefly press the multifunction key Press and hold the multifunction key for 2 seconds until a tone sounds Briefly press the multifunction key twice in succession Briefly press the multifunction key twice in succession Note: some mobile phones do not support all of the functions described above. Use "Switch between headset and telephone" to switch a call from the headset to the telephone. Listening to music If the connected device supports the A2DP profile, you can transmit music from the device to the Avalon BT. Function Increase volume Decrease volume Pause* Playback* Previous track* Next track* Headset status/mode Music playback Music playback Music playback Pause Music playback Music playback Command Press the "+" key Press the "-" key Briefly press the multifunction key Briefly press the multifunction key Press the "<" key Press the ">" key Note: Some mobile phones may require you to switch music playback from integrated speakers to the headset (usually under phone settings). Please refer to your mobile phone instructions for detailed information. Multifunction LED signals Signal Constant red light Dim red light Red and blue blinking Blue blinking (twice per second) Blue blinking (twice following each second) Blue blinking (3 times every 2 seconds) Blue blinking (once every 3 seconds) Red blinking (once per second) Headset status/mode Headset is charging Headset is charged Pairing mode Successful phone connection Standby (no device connected) Telephone is ringing Standby (with device connection) Low battery level Please adhere to the following instructions to ensure maximum lifespan for your Avalon BT: · The headset should not become damp or be stored in a damp place, as this could damage electronics Do not place the headset in direct sunlight or on hot surfaces, as this can damage the electronics and battery Do not attempt to open the headset, as it contains no replaceable parts Do not drop the headset or subject it to jolting Do not use chemicals to clean the headset Frequently asked questions F: What does a constantly blinking red LED mean?F: Why does the red LED not illuminate, although the headset is fully charged? [. . . ] Se alltid till att den med "L" markerade sidan är till vänster och den med "R" markerade sidan är till höger för att kunna höra stereoljudet korrekt. Använd funktionen "Växla från headset till telefon och tillbaka" för att koppla samtalet från headsetsystemet till telefonen. [. . . ]