User manual BAZOO USB HUB QUICK INSTALLATION GUIDE

[. . . ] Support Neck The support neck can be turned forward & backward, left & right to adjust the position. To install the software, please follow the steps below to finish: 1. insert the Auto-Run CD onto CD-ROM drive; the installation menu will be executed automatically. (If the auto-run does not function itself, double-click the "setup" icon in the CD files. [. . . ] The setup program will guide you to finish the installation step by step. Plug the USB plug to Computer USB is a PnP device; you can plug the device no matter the computer is on or off. Waiting for hardware install If your system is Windows XP Vista, windows will find a new device and install automatically. The setup program will guide you to finish the installation step by step. Window XP users can use the built-in audio directly and then set up: Devices USB 2. Note: When you have recorded an audio/video file with , , NANO" in your computer, please rename the recorded file. Otherwise, the existing old file may be replaced a new recorded one. When the light is not sufficient, you may click on "Low Light" to get a clear image. You can adjust the "Brightness, Contrast, Gamma, Hue, Saturation, Sharpness" different values for different circumstances and environment. Before adjusting values, you have to unclick "Auto" to unlock. Step 1: Select a contact and click the call icon (green button). Step 2: Once you are connected, click "Start My Video". Your friend can also do the same on his/her computer. Step 3: After your friend accepts the request, you'll be connected. Step 2: Click the "Video" tab, then click "Start Call". After your friend accepts this request, you'll be connected. Installing: Step 1 Connect the , , NANO" webcam to the cradle Step 2 Plug the USB connector into the USB port on your computer IF you are unable to see the image: Check if the imaging device shows error or not. Change another USB Port to test (proposes connecting to the host computer directly, don't use HUB) Check if the "preview" function has been chosen. Blurry image: The product is pre-set to match the power frequency (50Hz or 60Hz) for your countries/regions. However, if there is blurry image occurred, please check whether you need to change the pre-set frequency. [. . . ] However, if there is blurry image occurred, please check whether you need to change the pre-set frequency. Please choose the correct frequency of power source environment or video output signal system. Because of the USB port management of your PC, if you change the , , NANO" webcam to another USB port, you need to reset all functions. Col de support Le col de support peut être tourné vers l'avant et l'arrière, à gauche et à droite pour ajuster la position. [. . . ]