User manual BEBE CONFORT ELIOS

[. . . ] Model approved for group 0+ (child weighing less than 13 Kg). The child safety seat must be fitted with its back to the direction of travel (group 0+) up to the age of 13 months (i. The manufacturer's liability extends only to what is contained in European Regulation (R44). This approval does not preclude due care and observation of the highway code. [. . . ] Bébé Confort products have been carefully designed and tested to ensure the complete safety and comfort of your baby. Use only accessories sold or approved by Ampafrance. The use of other accessories may be dangerous. After having put your baby in the seat, ensure that the belt is correctly tensioned by pulling the strap. Before removal, ensure you have carefully noted the way which the various parts are attached to the seat so as to facilitate reassembly. Before cleaning check the label sewn into the fabric, you will find the wash symbols indicating the method of washing each item. Washing symbols : Machine wash 30 ° Hand wash only Do not use bleach (Chlorine) Shell: · Clean the shell using a damp cloth. Do not dry clean Do not tumble dry Do not iron CAUTION: before starting to fit the seat read through all the instructions provided. The blue marks on the Créatis indicate the path of the safety belt. 1 - Fasten the belt and place your Créatis facing backwards on the seat of the vehicle. 2' - Thread the lap belt through the lower slot in the shell and fasten it as shown. 16 - Press on the left-hand locking knob and keeping it depressed, move the handle to the rear. Move the handle from the lower at-rest position to from the upper carrying position. 18 - Press on the right-hand locking knob until you hear a click, the button will then remain depressed. 20 - When you hear a click from the right-hand knob and when it has returned to its initial position, the handle is in the locked position. IMPORTANT : before carrying the seat, check that the carry handle is locked in place. 19 - Press on the left-hand side locking knob and, keeping it depressed, fold the handle towards you. Mosquito net: (sold as an accessory) 23 - Place the top of the mosquito net over the sunshade, attach it using the 2 press studs and then hook the elastic attachments under the front of the shell. 22 - The sunshade can be folded back to allow you to see the child better. Compatibility : Créatis can be used with the following Bébé Confort frames: Loola High Trek Trophy Trophy Air 4 Trophy Air 6 Elite Twin Club WARNING: Before removal, ensure you have carefully noted the way which the various parts are attached to the seat so as to facilitate reassembly. For washing, check the care label sewn into the fabric (see care chapter p 7). Cushion for the newborn 24 - After washing, wait until the inner foam is completely dry. [. . . ] This certificate indicates that this product has been manufactured according to the various applicable quality standards and that it has been subjected to numerous checks during the different manufacturing stages. If in spite of all our efforts a fault should arise during the validity of this certificate, we undertake to respect the provisions of this guarantee. GUARANTEE CERTIFICATE: Bébé Confort guarantees that this product conforms with safety requirements as defined by applicable regulations, and that it has no design or manufacturing faults when purchased by the retailer. If within 24 months of purchase by you this product should reveal any fault, subject to normal use as defined in the instructions for use, Bébé Confort undertakes to repair it for you or to replace it, subject to the following exclusions: Use and purpose other than those indicated in the instructions for use, . [. . . ]