User manual BEGLEC CLS-215B V 1.1

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BEGLEC CLS-215B. We hope that this BEGLEC CLS-215B user guide will be useful to you.

Lastmanuals help download the user guide BEGLEC CLS-215B.


Mode d'emploi BEGLEC CLS-215B
Download

You may also download the following manuals related to this product:

   BEGLEC CLS-215B V 1.2 (695 ko)

Manual abstract: user guide BEGLEC CLS-215BV 1.1

Detailed instructions for use are in the User's Guide.

[. . . ] Just unscrew the 2 small bolts (marked "C" on the picture) so you can remove the cap and change the switch position. You can put the switch in 2 different modes (also see the electronic diagram of the switch) : Congratulations and thank you for buying this SYNQ product. Please read these operating instructions carefully so you will know how to operate this product properly. [. . . ] Attention: when a second subwoofer is connected, the impedance drops from 4 to 2!Please note that most amplifiers do not support heavy working conditions while under 2 load. moreover the damping factor of your amplifier drops significantly resulting in a weaker bass response. Preferred setup combination: When used with the CLS-8 mid/high cabinets you should try to keep a certain balance with this subwoofer to make a good sounding system. we suggest using 4pcs CLS-8 on 1pc CLS-215B. You should use 2 separate amplifiers plus an active crossover or audio processor crossed at +/-130Hz (24dB/oct). Of course you are not limited to this combination, you can experiment with other setups as much as you like! The CLS-215B can easily reproduce sound pressure levels (SPL) sufficient enough to cause severe and permanent hearing damage. Always protect your ears when you are exposed to SPL in excess of 85dB!Be sure that your power amp is turned off before connecting the speakers. The woofer is not protected against humid and rain. Therefore this speaker is intended for indoor use only, use of this product outdoors, in humid conditions, voids all warranties. Always mount this speaker in safe and stable way. Speakon® wiring is made as follows: POSITIVE = +1 and +2 NEGATIVE = -1 and -2 Cables to be used: You can use readymade cables but of course you can also assemble the speaker cables yourself. Take care to use good quality speaker cable with at least 2x 2. You will also need a pair of Neutrik® Speakon® NL4FC connectors. [. . . ] Clean the cabinet with a sponge and some non aggressive soap solution. Don't use any chemical solvents as they attack the enclosure!Every information is subject to change without prior notice You can download the latest version of this user manual on our website: www. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE BEGLEC CLS-215B

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BEGLEC CLS-215B will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag