Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BEHRINGER B-CONTROL. We hope that this BEHRINGER B-CONTROL user guide will be useful to you.
Lastmanuals help download the user guide BEHRINGER B-CONTROL.
Manual abstract: user guide BEHRINGER B-CONTROLPROGRAMMING GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] BEHRINGER B-CONTROL Programming Guide
The software used for illustration purposes is not included in the delivery. All rights contained therein belong to the respective owners. Screenshots were used with owners' kind permission. Technical specifications and appearance subject to change without notice. [. . . ] This channel must correspond to the receiving channel on the PRO-53 (setup in the "MIDI Settings" windows of the plug-in). Push Encoder 3 (PAR = parameter): Select controller 71.
5. Push Encoder 4 (VAL 1 = minimum value): Select the lowest value (0).
6. Push Encoder 5 (VAL 2 = maximum value): Select the highest value (127).
7. Push Encoder 6 (MODE = controller mode of the respective control elements): Select "Absolute" (AbS).
8. Push Encoder 7 (OPTION = LED circle performance): Select "1d. " 9. Push Encoder 8 (DISPLAY VALUE = display performance): Select "ON" to have the display show parameter changes when the encoder is turned. No parameters are displayed if you select "OFF. " 10. Repeat these steps again to assign ENV AMT and KBD parameters to the second and the third encoders.
BEHRINGER B-CONTROL Programming Guide
6
1. b Programming push encoders
Assigning the CUTOFF parameter of the PRO-53 to the rotary function of the first push encoder on the B-CONTROL. PRO-53 MIDI implementation: CUTOFF = Control Change 70 / possible values = 0 through 127 1. Select one of the four push encoder groups by using the respective keys.
2. Keep the EDIT key pressed and briefly turn the first push encoder, then release the EDIT key.
3. Push Encoder 1 (TYPE): Select control change (CC). Push Encoder 2 (CH): Select a MIDI channel. This channel must correspond to the receiving channel on the PRO-53 (setup in the "MIDI Settings" windows of the plug-in). Push Encoder 3 (PAR): Select controller 70.
6. Push Encoder 4 (VAL 1 = minimal value): Select the lowest value (0).
7. Push Encoder 5 (VAL 2 = maximum value): Select the highest value (127).
8. Push Encoder 6 (MODE): Select "Absolute" (AbS). Push Encoder 7 (OPTION = LED circle performance): Select "Cut" (short for cutoff). If the encoder is connected, the entire LED circle lights up. When you turn the encoder to the right, the LED circle goes out clockwise so that only the lower right LED remains lit. [. . . ] As soon as the data transfer is completed, "GOOd" appears in the display. You will have to program the second key function value in the EDIT mode. To do that, keep the EDIT key pressed and briefly press the key that is already partially programmed, and then release the EDIT key. Push Encoder 5 (VAL 2 = OFF value): Select 0 as your value.
6. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BEHRINGER B-CONTROL
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BEHRINGER B-CONTROL will begin.
