User manual BEHRINGER DD400

[. . . ] The delay effect creates a delay of the input signal with various repetitions. Different tempo settings allow interesting delay effects. 1. CONTROLS 1 2 5 3 4 7 8 6 Top view {1} The LEVEL control adjusts the output level. {2} The FEEDBACK (Feedback) control adjusts the amount of signal repetitions. [. . . ] The pedal will measure the time between the last two taps and automatically employ this as the delay time. The LED will now flash in rhythm with the new tempo. · After a few seconds, the unit will automatically exit tap mode and the footswitch can be used to activate/deactivate the effect again. · Turning the Time knob will override the tapped tempo and the delay will be determined by the settings of the Mode and Time knobs. {7} Use this ¼" TS IN connector to plug in the instrument cable. {8} The two ¼" TS connectors OUT A and OUT B send the signal to your amp. Use both connectors if you want to achieve full stereo delay effect. Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included). DIGITAL DELAY DD400 The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery, press the hinges with a ballpen and remove the pedal cover. As soon as you insert the jack into the in connector, the DD400 begins running. When not using the DD400, remove the jack from the in connector. The SERIAL NUMBER is located at the bottom. 2. WARRANTY For our current warranty terms, please refer to our website at http://www. behringer. com. 3. SPECIFICATIONS In Connector Impedance Out A Connector Impedance Out B Connector Impedance Power supply ¼" TS 1 k 9V , 100 mA, regulated Behringer PSU-SB U. S. /Canada 120 V~, 60 Hz China/Korea 220 V~, 50 Hz U. K. /Australia 240 V~, 50 Hz Europe 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz 2 mm DC jack, negative center 9 V type 6LR61 90 mA approx. 54 mm (2 ") x 70 mm (2 ¾") x 123 mm (4 4/5") approx. 0. 33 kg (0. 73 lbs) ¼" TS 1 k ¼" TS 500 k Power connector Battery Power consumption Dimensions (H x W x D) Weight BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown. 4. [. . . ] BEHRINGER accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph or statement contained herein. Colors and specifications may vary slightly from product. Our products are sold through authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. [. . . ]