User manual BEHRINGER DI400P

[. . . ] For example, keyboards seldom feature balanced outputs, and guitars can not be directly connected to mixing consoles because of the high impedance of guitar signals. The DI400P lets you directly tap into a high-impedance, unbalanced signalfor example, the signal between a guitar and a guitar amp. From there on, you can feed the signal directly to a mixing console. 1. [. . . ] 2: Guitar ß DI-box ß guitar amp/mixer This illustration shows the application of a DI-box. The signal feeding the amplifier remains unchanged; it is simply taken and routed into the amp. The low-impedance balanced signal is forwarded to the mic input of the mixing console. This application has its advantages particularly with bass guitars, because very few microphones can linearly transmit bass frequencies with high signal levels. If you are using effects, insert the DI400P after the effects device, so that you can monitor the effects via the PA system or the recording as well. BEHRINGER ULTRA-DI DI400P 3. SPECIFICATIONS Frequency response THD+N (distortion) INPUT Level change (input ß output) OUTPUT Impedance ratio (input ß output) Dimensions (H x W x D) Weight 40 Hz (-3 dB) to 20 kHz 0. 007% @ 1 kHz, input level +4 dBu ¼" TS (unbalanced) -20 dB Balanced XLR 110 : 1 1. 4" x 4. 7" x 2. 6" (35 mm x 120 mm x 66 mm) approx. 0. 44 lbs (0. 2 kg) BEHRINGER continuously strives to assure the highest quality standards possible. Required modifications may be implemented without prior notice. Technical data and the appearance of the unit may deviate from the above values and/or illustrations. 4. WARRANTY For our current warranty terms, please refer to our website at http://www. behringer. com SAFETY INSTRUCTIONS 1) Read these instructions. 5) Do not use this apparatus near water. 7) Install in accordance with the manufacturers instructions. 8) Only use attachments/accessories specified by the manufacturer. 9) Refer all servicing to qualified service personnel. [. . . ] Distributors and dealers are not agents of BEHRINGER ® and have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark. [. . . ]