User manual BEHRINGER DSP1200P

[. . . ] MODULIZER PRO DSP1200P User´s Manual Bedienungsanleitung Version 1. 0 November 1998 E D ® www. behringer. de 1 EG-Declaration of Conformity Spezielle Studiotechnik GmbH acc. to the Directives 89/336/EWG and 73/23/EWG We, BEHRINGER INTERNATIONAL GmbH Hanns-Martin-Schleyer-Straße 36-38 D - 47877 Willich Name and address of the manufacturer or the introducer of the product on the market who is established in the EC herewith take the sole responsibility to confirm that the product: MODULIZER PRO DSP1200P Type designation and, if applicable, Article-No which refers to this declaration, is in accordance with the following standards or standardized documents: x EN 60065 x EN 55020 x EN 55013 x EN 61000-3-2 x EN 61000-3-3 x EN 55022 The following operation conditions and installation arrangements have to be presumed: acc. Nier, President Name, address, date and legally binding signature of the person responsible Willich, 01. 11. 1998 2 SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electrical shock, do not remove the cover (or back). No user serviceable parts inside; refer servicing to qualified personnel. WARNING: To reduce the risk of fire or electrical shock, do not expose this appliance to rain or moisture. [. . . ] Especially small loudspeaker systems benefit from this effect and can sound a lot bigger than they actually are. A kick drum processed with the Super Bass effect gets the right punch to make itself heard in the mix-down. Bass processors are quite popular in dance/techno music, for example, you can give synthesizer bass lines much more power. The parameters: VARIATION: Frequency: adjusts the cutoff frequency of the crossover network. EDIT A: Density: this parameter controls the density of the processed bass signal. EDIT B: Ratio: determines how much the processed bass signal gets compressed. EDIT C: Bass Level: controls the low-frequency response of the original signal (which can even be faded out completely). Resonator A resonator simulates a system that oscillates at one frequency only and hence amplifies this frequency. The resonator implemented in the DSP1200P can be modulated in its resonance frequency, with positive and negative feedback of up to 100%. This effect is available in three different modes which can be adjusted with the VARIATION parameter: VARIATION: Resonator frequency mode: L: resonator frequency is modulated by the LFO. E: resonator frequency is modulated by the signal amplitude. R0. . . 7: resonator frequency is modulated by the random generator (additional 8-step slew rate is available in random generator mode). EDIT A: Frequency: controls the basic resonator frequency. INTRODUCTION 19 E + EDIT B: Speed: controls LFO speed*) in mode L, envelope follower speed in mode A and random oscillator speed in modes R0-R7. EDIT C: Depth: determines the modulation depth. EDIT D: Feedback: controls the resonance intensity. 2. OPERATION 2. 1 Effects structure Fig. 2. 1: Effects structure The following chapter will familiarize you with the operation of your BEHRINGER MODULIZER PRO. It will provide you with the basic understanding of how to obtain the desired results and should encourage you to experiment with the DSP1200P. Please bear in mind that the technical specifications of a unit may determine its limits, but the skill of the audio engineer determines how much use can be made from it. So do not hesitate to play with the unit, just like a musician does with an instrument, in order to explore the full functionality of your MODULIZER PRO. 20 2. OPERATION 2. 2 Selecting presets The MODULIZER PRO stores 100 user-definable presets. [. . . ] Damages/defects caused by the following conditions are not covered by this warranty: s misuse, neglect or failure to operate the unit in compliance with the instructions given in the user or service manuals. s connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used. s damages/defects that are caused by force majeure or by any other condition beyond the control of BEHRINGER INTERNATIONAL. Any repair carried out by unauthorized personnel will void the warranty. [. . . ]