User manual BEHRINGER DX626

[. . . ] DX626 Users Manual Version 1. 0 August 2002 PRO MIXER www. behringer. com ENGLISH PRO MIXER DX626 SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: All the safety and operation instructions should be read before the device is operated. Retain Instructions: The safety and operating instructions should be retained for future reference. Heed Warnings: All warnings on the device and in the operating instructions should be adhered to. Follow instructions: All operation and user instructions should be followed. [. . . ] Thus, you should adjust the equalizer before regulating the level with the GAIN control. 2. CONTROL ELEMENTS 5 PRO MIXER DX626 Adjust the channel volume with the CHANNEL fader. This feature is actually quite simple: by pushing the TALK button, the signal of the other input channels is lowered (TALK LED lights up), enabling your voice to be heard more clearly over the microphone. The MASTER control determines the output volume at the ). MASTER output (see A BALANCE control for the MASTER output is for shaping the stereo image. The BOOTH control determines the output volume at the BOOTH output (see ). The CUE control determines the volume of the headphones signal (PFL signal). 2. 2 Rear panel + The PFL signal is your headphones signal. It enables you to preview music without affecting the MASTER signal. The headphone channel signal is taken pre- fader (PFL=Pre-Fader Listening). With the three buttons CH-1, CH-2 and CH-3, you determine the signal source for the headphones signal. You can preview the channels individually or listen to all three simultaneously. The MASTER/CUE fader allows you to control the volume ratio between the input channels signal and the MASTER signal on your headphones. Here you can read the volume level of the PFL and MASTER signals from three, 10-character LED displays. The lower LED chain displays the PFL signal and the two upper LEDs display the right and left MASTER signals. The PRO MIXER DX626 BPM counter is an extremely useful feature. It ensures smooth transition from one track to the next, making your session an absolute success. It can calculate the various tempi of tracks in bpm (beats per minute). The left display indicates the tempo on channel 2 and the right display shows the tempo on channel 3. The CROSSFADER is for crossfading between channels 2 and 3. This is the connector for a commercially available 12-volt BNC lamp. Turn on the DX626 with the POWER button. 2. 3: The DX626 rear connectors With the exception of the microphone and headphone connectors, the PRO MIXER DX626 only has cinch jacks, which can be found on the rear panel of the console. [. . . ] This also applies to defects caused by normal wear and tear, in particular, of faders, potentiometers, keys/buttons and similar parts. Damages/defects caused by the following conditions are not covered by this warranty: s improper handling, neglect or failure to operate the unit in compliance with the instructions given in BEHRINGER user or service manuals. s connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used. s damages/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. [. . . ]