User manual BEHRINGER EG540

[. . . ] EG540/1040 User's manual Version 1. 0 August 2006 EUROGRAND K1800FX EUROGRAND EG540/1040 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. 5) Do not use this apparatus near water. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. [. . . ] What is more, you can use the music sequencer for practising. For example, you could record the left and right-hand parts of a piece separately on the two tracks. During playback switch off one track (=hand) and play the muted part yourself. Thus, you can practice each part individually within its musical context. 5) Switch on the acoustic metronome signal by pressing the METRONOME button, if you want to make a metronomebacked recording. 6) Start recording by pressing the START/STOP button or simply start playing on the keyboard. The current meter is counted in the display. 6. 5. 1 Recording pieces of music This section describes how to record music pieces with the built-in music sequencer. The REC LED above the TRACK-1 or TRACK-2 button lights up. The dots in the display start flashing in the adjusted metronome tempo, thus indicating the beat. Now, the EG540/1040 is set to record mode. If the display starts flashing during recording and reads the message FUL, this is to warn you that the recording memory has been used up. All data recorded up to this point will be stored, but the recording process will be terminated. 7) Once your recording is finished stop the sequencer by pressing the START/STOP button again. 14 6. ADVANCED OPERATION EUROGRAND EG540/1040 Recording mode automatically. will thus be canceled 8) Repeat the whole procedure to record a second track. This time, however, select TRACK 2 instead of TRACK 1 in step #3. TIP: If the right-hand part of a music piece you want to practice has been recorded on track 2 and the left-hand part on track 1 (for example, by your piano teacher), you can mute one of the two tracks during playback to practice the corresponding part. TIP: Press the METRONOME button again to stop the metronome click. ATTENTION: If you select a track for recording, which already contains note information, all previously recorded notes on this track will be erased!4) Select a sound in the SOUND SELECT section. You can also use a sound combination (see chapter 5. 1) for recording. 6. 5. 2 Editing pieces of music This section describes how to edit a recording by replacing a recorded track with a new recording. What is more, you can see how to record a track without playing back the second track, which can be useful when you record two different pieces of music. You must have recorded at least one track before you can carry out the steps described below. If you are not sure whether a track has been recorded or not, check this by pressing the TRACK 1 and TRACK 2 button, BEFORE you enter record mode. [. . . ] damages/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the warranty. If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the warranty, the inspection costs are payable by the customer. Products which do not meet the terms of this warranty will be repaired exclusively at the buyer's expense. [. . . ]