User manual BEHRINGER EM600

[. . . ] CONTROLS Top view The MIX knob is used for setting the level of the delays. The REPEAT knob determines the number of delays. The TIME control adjusts the delay time. The length of time depends on the selected program. [. . . ] With the MOD knob, you can add a nice modulation effect to your delays (TYPE switch position: ANALOG=Vibrato; DIGITAL=Chorus; TAPE= Wow and flutter). The TYPE switch allows you to choose from different classic delay characteristics, ranging from TAPE (delays with subtle high-frequency damping), DIGI (high-quality delays) to ANALOG (dark and slightly distorted delays). With the TRAILS switch, you can prevent delays from being cropped when bypassing the effect. Use the DC IN connection at the front of the unit to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit. ECHO MACHINE EM600 The EM600 has no On/Off switch. It is operable as soon as you insert a plug into one of the IN connectors. Disconnect the plug, if you don't use the EM600. In doing so, you can extend the life time of the battery. The SERIAL NUMBER is located at the underside. In rare cases interferences of the normal function may appear by external influence (e. g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application. 2. WARRANTY For our current warranty terms, please refer to our website at http://www. behringer. com. 3. SPECIFICATIONS IN A / IN B Connector Impedance OUT A / OUT B Connector Impedance Power supply BEHRINGER PSU-SB 1/4" TS 500 k 1/4" TS 1 k 9 V_, 100 mA regulated USA/Canada 120 V~, 60 Hz China/Korea 220 V~, 50/60 Hz Europe/U. K. /Australia 230 V~, 50 Hz Japan 100 V~, 50 - 60 Hz Export model 120/230 V~, 50 - 60 Hz 2 mm DC jack, negative center 9 V type 6LR61 60 mA approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. 0. 33 kg (0. 73 lbs) Power connector Battery Power consumption Dimensions (H x W x D) Weight BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may therefore differ from those listed or shown. 4. [. . . ] Products are sold through our authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. © 2007 BEHRINGER International GmbH. [. . . ]