User manual BEHRINGER FBQ800

[. . . ] FBQ800 User's Manual Version 1. 0 November 2005 MINIFBQ MINIFBQ FBQ800 IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. WARNING: This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure--voltage that may be sufficient to constitute a risk of shock. [. . . ] To monitor the output level of the FBQ800, use the METER SELECT button ( ) together with the IN/OUT meter ( ), as described in this documentation. While you monitor the output level of the FBQ800, use the LEVEL knob ( adjust the output level of the FBQ800 to 0 dB. ) to If the frequency-band faders and all other control elements are not already activated, use the IN/OUT button ( ) to activate them. To EQ the signal, use the EQ section ( ), as described in this documentation. To monitor the output level, use the METER SELECT button ( ) together with the IN/OUT meter ( ), as described in this documentation. If the output level is higher or, alternatively lower than 0 dB, use the LEVEL control ( ) to adjust the output level to 0 dB. Most of the time, 0 dB is the optimal output level. However, the optimal level for some output targets can be greater or less than 0 dB. 8 Periodically monitor and, if necessary, adjust the input level and output level, as described previously in steps 3 and 6. CONTROL ELEMENTS MINIFBQ FBQ800 If you activated all control elements ( input signal, as follows: ), you can use control elements through to EQ the RANGE button: To select a range for the EQ faders, use this button, which can appear: pushed in and illuminated: The fader range extends from -6 dB to +6 dB. not pushed in and not illuminated: The fader range extends from -12 dB to +12 dB. FBQ IN button: To manage the FBQ Feedback Detection System, use this button, which can appear: pushed in and illuminated: The FBQ Feedback Detection System is activated. If the signal level is high in a frequency band, the relevant fader LED illuminates brightly. In addition, all other fader LEDs are dimmed. To reduce the potential for feedback, cut the signal in the relevant frequency band ( ). not pushed in and not illuminated: The FBQ Feedback Detection System is not activated. Fader LEDs illuminate with identical brightness. They do not identify possible feedback frequencies. EQ section: If you activated all control elements ( ), the input signal travels to the EQ section. In this section, you EQ (EQualize) the input signal. This means that you emphasize and de-emphasize specific frequencies, many of which are associated with specific sounds. For details, see About sounds and their frequency bands, which follows. About the frequency-band faders The EQ section includes 9 frequency bands. [. . . ] connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used. damages/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. 6. If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the warranty, the inspection costs are payable by the customer. Products which do not meet the terms of this warranty will be repaired exclusively at the buyer's expense. [. . . ]