User manual BEHRINGER FCA202

[. . . ] AUDIO FCA202 Operating Manual Version 1. 0 August 2005 F-CONTROL ENGLISH F-CONTROL AUDIO FCA202 IMPORTANT SAFETY INSTRUCTIONS CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. [. . . ] You can connect balanced or unbalanced audio cables with ¼" jack plugs to the BAL/UNBAL OUT sockets. You can connect unbalanced audio cables with ¼" TS jack plugs to the UNBAL IN sockets. 3. 3 FCA202 CONTROL PANEL In addition to the device drivers on the PC, a CONTROL PANEL is installed during the installation process. If you use an ASIO® driver, use this software to configure the FCA202. Youll find more information on the drivers in Chapter 4. 1. In Windows® systems, the panel can be accessed from the Start Menu. In the Start Menu, choose Control Panel, and then look for the entry FCA202. Alternatively, you may find that the audio software you use has a dialog for opening up the panel. For more information, please refer to the manual for your audio application. With Mac OS® X, you first have to select the FCA202 in System Settings under the entry sound. You can then directly configure the card from the audio application that you use. For more information, please refer to the appropriate software documentation. 3. OPERATING ELEMENTS AND CONNECTIONS 17 F-CONTROL AUDIO FCA202 Fig. OPERATING ELEMENTS AND CONNECTIONS F-CONTROL AUDIO FCA202 ENGLISH The ABOUT section gives information about the driver versions that are used. Compare the version numbers given here with the drivers available via Internet from www. behringer. de. If you have any problems, you should always try to install the newest driver software. Use the LATENCY SELECT slider to set the desired latency. Click the APPLY button to accept the selection made. + You can only set the latency from the CONTROL PANEL if you are using an ASIO® driver. Very short latency values can lead to audio dropouts. If this happens, pull the slider further to the right so that you set up higher values. Youll find further information in Chapter 4. 1. The SAMPLING FREQUENCY selection menu allows you to set the sample rate for the digital converter. The available frequencies are 44. 1 kHz, 48. 0 kHz and 96. 0 kHz. [. . . ] Products which do not meet the terms of this warranty will be repaired exclusively at the buyers expense. BEHRINGER will inform the buyer of any such circumstance. WARRANTY F-CONTROL AUDIO FCA202 ENGLISH a written repair order within 6 weeks after notification, BEHRINGER will return the unit C. O. D. with a separate invoice for freight and packing. [. . . ]