User manual BEHRINGER FCB1010

[. . . ] MIDI FOOT CONTROLLER FCB1010 Users Manual Version 1. 5 June 2004 ENGLISH MIDI FOOT CONTROLLER FCB1010 IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. 5) Do not use this apparatus near water. [. . . ] The VALUE 1 LED in the display lights up. Use the footswitches 1 through 10/0 or EXPRESSION PEDAL A to enter the controller value (0 through 127). To correct your selection, use the DOWN/ESCAPE key to go one step backward. Confirm your selection by pressing UP/ENTER. The SELECT LED in the display lights up. Select an additional MIDI function you wish to edit or quit the PRESET programming mode by keeping DOWN/ESCAPE pressed for a few seconds. s + s + s s s s s s 2. 4. 2 Programming switches s s Select the PRESET you wish to edit. Press DOWN for more than 2. 5 sec to enter PRESET programming mode. The green SWITCH 1/SWITCH 2 LED in the display starts flashing. Enable/disable the SWITCHES using footswitches 1 and/or 2 and confirm your selection with UP/ENTER. The corresponding footswitch and SWITCH LEDs light up. Exit PRESET programming mode through keeping the DOWN/ ESCAPE key for a few seconds, or press the UP/ENTER key in order to get to the next page, where you can edit various MIDI functions for the preset selected at the beginning. + s s s s 2. 4. 5 Programming EXPRESSION PEDALS A/B s s Select the PRESET you wish to edit. Keep DOWN pressed for more than 2. 5 sec to enter PRESET programming mode. The green SWITCH 1/SWITCH 2 LED in the display starts flashing. The SELECT LED in the display begins to light up. To program a MIDI function, you have to first activate it. Individual MIDI functions are activated by keeping the corresponding keys pressed for a few seconds. Active MIDI functions are indicated by a permanently lit footswitch LED. 2. 4. 3 Programming program changes s s Select the PRESET you wish to edit. Keep the DOWN/ESCAPE key pressed longer than 2. 5 sec. The green SWITCH 1/ SWITCH 2 LED in the display starts flashing. Use the UP/ENTER key to get to the next page. PROGRAMMING THE FCB1010 9 MIDI FOOT CONTROLLER FCB1010 s Activate the expression pedal you wish to program by keeping the corresponding foot key pressed for a few seconds (foot keys 8 or 9). The foot key LED blinks after you briefly press the foot key yet again. [. . . ] Products which do not meet the terms of this warranty will be repaired exclusively at the buyers expense. BEHRINGER will inform the buyer of any such circumstance. If the buyer fails to submit a written repair order within 6 weeks after notification, BEHRINGER will return the unit C. O. D. with a separate invoice for freight and packing. [. . . ]