User manual BEHRINGER GM212

[. . . ] GM212 Users Manual Version 1. 1 May 2006 V-TONE V-TONE GM212 IMPORTANT SAFETY PRECAUTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. 5) Do not use this apparatus near water. [. . . ] The HIGH control regulates the upper frequency range. The LEVEL control adjusts the volume of the respective channel. Adjust LEVEL to achieve the desired volume balance between both channels. The CD IN (RCA connectors) lets you feed an additional stereo signal into your V-TONE. You can play along to the beat of a drum computer or play to music from a CD or MD player. + FX INSERT: Your V-TONE features a serial insert loop that can be used to connect external effects (e. Connect the SEND connector on the V-TONE to the input of your effects unit. Connect the output of your external effects unit to the RETURN connector of your V-TONE. 1. 1. 2 Initial operation Please make sure that your V-TONE is provided with sufficient ventilation, and never place it on other amplifiers or in the vicinity of a heater to avoid the risk of overheating. + Before plugging your V-TONE into a power socket, please make sure you have selected the correct voltage: The fuse mount near the power cord connector has three triangular markings. Two of these triangles are facing opposite one another. Your V-TONE is set up for the voltage indicated near these markings, and can be altered by turning the fuse mount by 180 degrees. ATTENTION: This does not apply to export models built for 120 V, for example! + + If you use your V-TONE unit with a different voltage, you must change the fuses accordingly. The BEHRINGER HP series is well suited for this, for example. When the PHONES connector is used, the internal loudspeakers and speaker outputs are disconnected. Connect the mono jack connector of a footswitch to the FOOTSWITCH connector. The footswitch lets you switch between two channels. The PRESENCE control gives you an additional way to cut or boost the highs. The MASTER control regulates the overall volume as well as headphone volume. The POWER switch should always be in the Off position before you connect the V-TONE to the main power source. Please note: The POWER switch does not fully disconnect the unit from the mains. To disconnect the unit from the mains, pull out the main cord plug or appliance coupler. When installing the product, ensure the plug or appliance coupler is readily operable. Unplug the power cord when the unit is not used for prolonged periods of time. 3. [. . . ] damages/defects caused by force majeure or any other condition that is beyond the control of BEHRINGER. s s 5. Any repair or opening of the unit carried out by unauthorized personnel (user included) will void the warranty. If an inspection of the product by BEHRINGER shows that the defect in question is not covered by the warranty, the inspection costs are payable by the customer. Products which do not meet the terms of this warranty will be repaired exclusively at the buyers expense. [. . . ]