User manual BEHRINGER MIC100

[. . . ] A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. [. . . ] The balanced 1/4" TRS INPUT of your MIC100 can be used to connect your electric guitar, for example. This input is wired parallelly to the XLR input. 4 2. CONTROL ELEMENTS + TUBE ULTRAGAIN MIC100 + Use the balanced XLR INPUT to connect your microphone. In contrast to its outputs, the MIC100s inputs should never be used simultaneously! 2. 2 User interface Fig. 2. 2: User interface of the MIC100 The GAIN control allows applying gain from +26 to +60 dB to the input signal. This control should be set fully counterclockwise when (dis)connecting a sound source to the MIC100. When all connections are made, slowly start raising gain. We recommend using the LED meter to adjust gain. The LED chain displays the output signal level in dB. Please make sure that the clip LED never lights up permanently. It should light up only at peak signals, but never all the time. 2. CONTROL ELEMENTS 5 TUBE ULTRAGAIN MIC100 If your MIC100 is connected to the mains via the enclosed power supply unit, the POWER LED lights up to indicate that your MIC100 is running. The 20 dB PAD button reduces the input sensitivity by 20 dB. The appropriate setting depends on the equipment connected. No matter what your application is, the clip LED warns you to reduce the gain setting, so as to avoid distortion. This +48 V switch activates the phantom power supply for the XLR input. Phantom power supply is required for operating condenser microphones. With the PHASE REVERSE switch, the input signal is reversed by 180°. This function is available for both mic and line signals. Use this function in a multi-microphone setup if you detect phase cancellations in specific frequency bands. Use the LIMITER switch to limit the signal and to prevent distortion. The OUTPUT control governs the output level of the device within a range from -oo to +10 dB. [. . . ] 0. 5 kg (1. 1 lbs) BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated. 10 6. SPECIFICATIONS TUBE ULTRAGAIN MIC100 The information contained in this manual is subject to change without notice. [. . . ]