User manual BEHRINGER PL2000

[. . . ] The POWER switch should always be in its Off position whenever you connect the unit to the mains. Merely pressing the POWER switch does not disconnect the unit fully from the mains. To fully disconnect the unit from the mains, unplug the power cord from the power outlet. During the installation, make sure that both the power cord and the power outlet function properly. [. . . ] If this happens, remove one or more of the units you have connected in order to lower the overall load below 8 A. 2 minutes the automatic circuit breaker is reset and your PL2000 can be turned on again. If the circuit breaker engages again, disconnect additional equipment. POWERLIGHT PL2000 Important information on the top side Important information about the polarity of the connectors and the maximum allowed load is located on the top side of your POWERLIGHT PL2000. SERIAL NUMBER. INSTALLATION IN A RACK The PL2000 requires one height unit (1 HE) for installation in a 19-inch rack. Please assure that there are additional 10 cm (4 inches) of free space in the back for connecting cables. Be sure that there is enough air space around the unit for cooling and, to avoid overheating, please do not place the EUROPOWER on top of power amplifiers or other heat-emitting equipment. For installation in a rack, use M6 machine screws and nuts. WARRANTY Ideally, please register your new BEHRINGER equipment directly after the purchase under www. behringer. com (or www. behringer. de ) and carefully read the warranty terms and conditions. BEHRINGER offers a one-year* warranty on material and workmanship, starting with the date of purchase. You can read the complete terms and conditions of this warranty at our webpage www. behringer. com (or www. behringer. de). Should your BEHRINGER product malfunction, we want to have it repaired as quickly as possible. Please directly contact the BEHRINGER dealer from whom you have purchased your equipment. If your BEHRINGER dealer is not located near you, you may also directly contact one of our subsidiaries. A list with contact addresses of the BEHRINGER subsidiaries is located in the original packaging of your equipment (Global Contact Information/European Contact Information). WARRANTY 3 POWERLIGHT PL2000 If no contact information is listed for your country, please contact the distributor nearest you. Contact addresses can be found in the support area of our website, www. behringer. com. Registering your equipment with us after the purchase makes processing possible warranty claims substantially easier. *Conditions other than these may apply to customers from the European Union. EU customers can acquire additional information by contacting BEHRINGER Support Germany. SPECIFICATIONS Connections Overall load per channel Fuses Lighting Main fuse Rack light Voltage F 32 mA L 250 V 8 A 250 V (automatic circuit breaker) 3. 5 Watts Europe/U. K. /Australia 230 V~, 50 Hz China USA/Canada Japan Mains connection Dimensions (H x W x D) Weight (net) 220 V~, 50 Hz 120 V~, 60 Hz 100 V~, 50 - 60 Hz 8 IEC connectors max. 8 A Overall load for all channels max. [. . . ] Distributors and dealers are not agents of BEHRINGER® and have absolutely no authority to bind BEHRINGER® by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH. BEHRINGER® is a registered trademark. © 2005 BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. [. . . ]