User manual BEHRINGER PX1000

[. . . ] With the BEHRINGER ULTRAPATCH PX1000 you own an easy-to-use 48-point patchbay offering 1/4" TRS connectors, that can be operated in five different modes simply by aligning the modules manually. For this purpose, simply loosen the two lower front screws to remove the front panel. 1. 5 Mode 5 $ )5217 % $ 5($5 % 1. 1 Mode 1 $ )5217 % $ 5($5 % Here, the contacts of jacks A & B on the rear are interconnected. The configuration is the same as in mode 4. However, in contrast to mode 4, this mode is usually deployed for equipment in a fixed installation. [. . . ] Use the BEHRINGER ULTRAMATCH PRO SRC2496 specifically designed for this and other digital signal-related functions. 2 3. CAUTIONS ULTRAPATCH PX1000 Microphone inputs operate at a level several orders of magnitude lower than line levels (+4 dBu or -10 dBV). Therefore, they should never be routed via a patchbay. In any case, patching in a field with +48 V DC (phantom power) is to be avoided at all costs. It is best to plug mics directly into the mixing console or via special XLR type wall boxes connected to the mic inputs of the console using good quality balanced multicore cables. 6. SPECIFICATIONS Height Width Depth Weight 1 3/4" (44. 5 mm) 19" (482. 6 mm) 2 3/4" (69. 3 mm) approx. LABELLING With so many patch points in use at any one time, you will probably never be able to keep track of them without labelling. Your BEHRINGER ULTRAPATCH PX1000 features white labels above the upper jacks and white labels below the lower jacks for the purpose of labelling. When labelling, it is advisable not to use permanent markers as you may want to re-label, if you decide to re-configure your patchbay signal routing again. Connectors 1/4" TRS balanced 5. PATCHBAY ORGANIZATION Attached is an example configuration that shows how you can use your patchbay. This is only an example to illustrate the use of your PX1000. Depending on your application, you may need several PX1000s. It should be noted that patchbays should be placed one below the other in such a way that the patch cords dont hang carelessly over the patchbays. BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or shown. 6. SPECIFICATIONS 3 ULTRAPATCH PX1000 7. WARRANTY § 1 WARRANTY CARD/ONLINE REGISTRATION To be protected by the extended warranty, the buyer must complete and return the enclosed warranty card within 14 days of the date of purchase to BEHRINGER Spezielle Studiotechnik GmbH, in accordance with the conditions stipulated in § 3. Failure to return the card in due time (date as per postmark) will void any extended warranty claims. Based on the conditions herein, the buyer may also choose to use the online registration option via the Internet (www. behringer. com or www. behringer. de). BEHRINGER (BEHRINGER Spezielle Studiotechnik GmbH including all BEHRINGER subsidiaries listed on the enclosed page, except BEHRINGER Japan) warrants the mechanical and electronic components of this product to be free of defects in material and workmanship for a period of one (1) year* from the original date of purchase, in accordance with the warranty regulations described below. If the product shows any defects within the specified warranty period that are not excluded from this warranty as described under § 3 and 4, BEHRINGER shall, at its discretion, either replace or repair the product using suitable new or reconditioned parts. In the case that other parts are used which constitute an improvement, BEHRINGER may, at its discretion, charge the customer for the additional cost of these parts. [. . . ] Such costs will also be invoiced separately when the buyer has sent in a written repair order. § 5 WARRANTY TRANSFERABILITY This warranty is extended exclusively to the original buyer (customer of retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc. ) shall be entitled to give any warranty promise on behalf of BEHRINGER. § 6 CLAIM FOR DAMAGES Failure of BEHRINGER to provide proper warranty service shall not entitle the buyer to claim (consequential) damages. [. . . ]