User manual BEHRINGER RV600

[. . . ] CONTROLS Top view The TONE control allows you to shape your overall sound. The MIX control determines the amount of reverb added to the signal. The DECAY control determines how quickly the reverb fades. In ECHO mode, it determines the amount of signal feedback. [. . . ] SPRING: Simulates the distinct and beloved sound of a spring reverb. `63 SP: Emulates the classic sound of a 1963 guitar combo spring reverb. With the TRAILS switch turned on, the reverb will smoothly fade away once you bypass the effect instead of simply being cut off. Use the two 1/4" TS connectors IN A and IN B to plug in a stereo input signal. The two 1/4" TS connectors OUT A and OUT B send the signal to your amp. Use both outputs to achieve a full stereo effect. Use the footswitch to activate/deactivate the effect. Use the DC IN connection to plug in a 9 V power supply (not included). The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery (not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to scratch the unit. REVERB MACHINE RV600 The RV600 has no on/off switch. As soon as you insert the plug into the IN connector, the RV600 is on. When not using the RV600, remove the plug from the IN connector. The SERIAL NUMBER is located on the underside. In rare cases interferences of the normal function may appear by external influence (e. g. electrostatic discharge), as for example sound disturbances or malfunctions. If this occurs, please turn down the volume on subsequent amplifiers and disconnect the input connector briefly to restart the application. 2. WARRANTY For our current warranty terms, please refer to our website at http://www. behringer. com. 3. SPECIFICATIONS IN A Connector Impedance Impedance mono OUT A Connector Impedance Power supply 1/4" TS 1 k 1/4" TS 500 k 250 k IN B Connector Impedance OUT B Connector Impedance 1/4" TS 500 k 1/4" TS 1 k Power connector Battery Power consumption Dimensions (H x W x D) Weight 9 V_, 100 mA, regulated BEHRINGER PSU-SB U. S. A. /Canada 120 V~, 60 Hz China 220 V~, 50 Hz Korea 220 V~, 60 Hz Europe/U. K. /Australia 230 V~, 50 Hz Japan 100 V~, 50 ­ 60 Hz 2 mm DC jack, negative center 9 V type 6LR61 30 mA approx. 54 mm (2 1/8") x 70 mm (2 3/4") x 123 mm (4 4/5") approx. [. . . ] Colors and specification may vary slightly from product. Products are sold through our authorized dealers only. Distributors and dealers are not agents of BEHRINGER and have absolutely no authority to bind BEHRINGER by any express or implied undertaking or representation. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any purpose, without the express written permission of BEHRINGER International GmbH. [. . . ]