User manual BEHRINGER UB 2442FX-PRO

[. . . ] EURORACK UB1622FX-PRO UB1832FX-PRO UB2222FX-PRO UB2442FX-PRO ENGLISH Users Manual Version 1. 3 June 2004 EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO IMPORTANT SAFETY INSTRUCTIONS DETAILED SAFETY INSTRUCTIONS: 1) Read these instructions. CAUTION: To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside; refer servicing to qualified personnel. 5) Do not use this apparatus near water. [. . . ] Additionally, it provides for a simple monitor path using the switch CTRL ROOM & PHONES ONLY. CTRL ROOM & PHONES ONLY Use this switch to route the signal appearing at the AUX RETURN 4 jacks to the control room and headphones outputs. Fig. 2. 12: Stereo aux return and stereo aux return (to aux send) controls STEREO AUX RETURN 1/2 (TO AUX SEND) The two right-hand STEREO AUX RETURN controls have a special function: they can be used to add an effect to a monitor mix. An example follows (UB1622FX-PRO wired to an effects device): Monitor mix with effect In this instance, your effects device should be set up as follows: the AUX SEND 2 jack should be connected to the L/Mono input of your effects device, with its outputs coming back into the STEREO AUX RETURN 1 jacks. Connect the AUX SEND 1 jack output to the amplifier of your monitor system. The AUX SEND 1 master control determines the overall volume of the monitor mix. Using the STEREO AUX RETURN (TO AUX SEND) control, the effect signal can now be blended into the monitor mix. You can easily use the headphones distribution amplifier BEHRINGER POWERPLAY PRO HA4600/HA4700/HA8000 to provide four (HA8000: eight) stereo headphone mixes for your studio. The following table shows which jacks on the console can be used for this purpose. 2. 3. 6 Supplement to UB1832FX-PRO The UB1832FX-PRO has a stereo fader for the AUX RETURN FX and offers a variety of routing options: MUTE disables the effect return (but not PFL of course!), SOLO routes it to the Solo or PFL busses, SUB to the subgroups and MAIN to the main mix. @rhyrssrp qrvprrprvr vthys AUX SEND ! @rhyrssrp Uurrssrpvthy qrvprrvthy rhpururv ihpx vvh V7 %!!AYQSP STEREO AUX RETURN connectors STEREO AUX RETURN (TO AUX SEND ) control V7 '"!AYQSP AUX SEND STEREO AUX RETURN !connectors MONITOR switch of the FX/AUX!STEREO AUX STEREO AUX RETURN connectors RETURN (TO AUX !2. 13: The FX/AUX 2 return fader of the UB1832FX-PRO MON The MON switch routes the signals appearing at the AUX RETURN 2 jacks to the monitor path, along with the monitor signals from the channels. If you wish to route the effect signal to the monitor mix, you can also switch aux 1 to pre-fader, drive the effect device from the aux 1 output and return the effect signal via AUX RETURN 2 to the monitor signal. V7!##!AYQSP AUX SEND !STEREO AUX RETURN connectors STEREO AUX RETURN (TO AUX SEND ) control STEREO AUX RETURN !(TO AUX SEND !) control vhy) AUX SEND STEREO AUX RETURN !2. 1: Connectors and controls for monitor mix with effect 2. CONTROL ELEMENTS AND CONNECTORS 9 EURORACK UB1622FX-PRO/UB1832FX-PRO/UB2222FX-PRO/UB2442FX-PRO 2. 3. 7 XPQ Surround function (UB1832FX-PRO only) + If you connect a compressor or a noise gate post 2-track output, the main mix fader will probably not be able to create a satisfactory fade-out effect. 2. 3. 9 Lamp socket (UB2442FX-PRO only) Use this BNC socket to connect a gooseneck lamp (12 V DC, max. 0. 5 A). 2. 3. 10 Level meter and monitoring Fig. 2. 14: Control elements of the surround function The XPQ surround function can be enabled/ disabled with the XPQ TO MAIN switch. This is a built-in effect that widens the stereo width, thus making the sound more lively and transparent. Use the SURROUND control to determine the intensity of this effect. VOICE CANCELLER Here, you have a filter circuitry that lets you almost entirely remove the vocal portion of a recording. [. . . ] BEHRINGER will then issue a return authorization number. Subsequently, the product must be returned in its original shipping carton, together with the return authorization number to the address indicated by BEHRINGER. Shipments without freight prepaid will not be accepted. 5 WARRANTY TRANSFERABILITY This warranty is extended exclusively to the original buyer (customer of retail dealer) and is not transferable to anyone who may subsequently purchase this product. No other person (retail dealer, etc. ) shall be entitled to give any warranty promise on behalf of BEHRINGER. 6 CLAIM FOR DAMAGES Failure of BEHRINGER to provide proper warranty service shall not entitle the buyer to claim (consequential) damages. [. . . ]