Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual BEITER RE. We hope that this BEITER RE user guide will be useful to you.
Lastmanuals help download the user guide BEITER RE.
Detailed instructions for use are in the User's Guide.
[. . . ] Update 01/2004
The
Attaching the Support on the Bow window:
REST
HOW TO INSTALL
Clean the surface of the bow window. Insert a bow-square on the string and the Beiter Rest Tool in the Beiter Rest to easily find the correct position, as much as possible parallel to the bow square (pic. Pay attention that the Beiter Rest Tool must be inserted completely from in the spindle from the back-side. [. . . ] With the angle of 15°, one complete turn of the Beiter Rest Tools moves the Arrow Rest by 0, 39mm up or down. Moving the Arrow Rest by one line (1mm) with the 15° angle, effects a height adjustement of 0, 26mm. NOW THE BEITER REST IS READY TO BE USED!
pic. 18 DE-78083 Dauchingen
www. WernerBeiter. com
Tel. +49 7720 856860 Fax +49 7720 4238 email: info@wernerbeiter. com
Update 01/2004
The
PLEASE NOTE:
REST
HOW TO USE
The Beiter Rest can not have unlocked screws!The only moving part is the Spindle: without the inserted Rest Tool, the spindle can no longer move!The finger may - especially at the beginning - wear: this may be compensated with the height adjustement. If the wear is too extreme, the Finger can be exchanged easily, precisely and quickly. A too high or too low nocking point, or a not precise tuning causing clearance problems), the Finger may wear faster, than with a correct set-up.
CHANGING THE FINGER:
You may easily change from Aluminum to Carbon and back, finding always again exact the same position: simply change from the finger "12" to "23" and vice-versa. Another reason o change the Finger, may be the fact that the Finger brakes or wears due to an incorrect tune. A small groove may be compensated with the height adjustement.
pic. 11
IMPORTANT!
Every Finger is produced out of a single mould, so each Finger is identical to the other!To exchange the Finger, insert the Beiter Rest Tool completely into the Spindle (for LH without the sleeve, if there is not enough space), and turn clockwise (to the right pic. 11) until the Finger is not anymore guided by the Spindle and touches the sleeve. [. . . ] 18 DE-78083 Dauchingen
Description Rest, Finger 15-12-0, 65 Rest, Finger 16-17-0, 65 Rest, Finger 17-23-0, 77 Rest, Finger 15-12-0, 65, 10 pcs. Glue Strip Rest, Spindle Rest, Glue Strip Rest Tool
pic. +49 7720 856860 Fax +49 7720 4238 email: info@wernerbeiter. com
www. WernerBeiter. com [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BEITER RE
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual BEITER RE will begin.
