User manual BEKO DG584

[. . . ] ·KeepthisOperatingManualwithineasyreach. Youmayneeditinthe future. ·Pleasereadalladditionaldocumentssuppliedwiththismachine. PleasenotethatthisOperatingManualmaybeapplicableforseveralother models. Differences between models will be identified in the manual. Explanation of symbols ThroughoutthisOperationManualthefollowingsymbolsareused: C Important information or useful hints about usage. [. . . ] Opentheloadingdoor, placethe laundry inside and fill detergent drawer. Set the washing program, temperature, spin speed and, if required, the auxiliary functions. When the time delaying button is pressed once, a 3 hour delay is selected and the relevant led lights. When the same button is pressed again, 6hours;andifpressed once more, 9 hours delay will be selected. If the time delaying button is pressed one more time, time delaying function will be cancelled. EN Set the time delay as you require. Delayed operation of the selected program is started by pressing the "Start/Pause/Cancel"buttonafter making the time delay selection. C Morelaundrymaybeloaded/ removed during the time delay period. Pressthe"Start/Pause/Cancel" button to switch the machine to "Pause"mode. Press"Start/Pause/Cancel"button to start the program after making the new time delay selection. C In the event that any of the lights of 3-6-9 options does not light up after selecting the new time delay, it means that time delay function is cancelled. modebypressingthe"Start/Pause/ Cancel"buttonwhenitisoperating. In thiscase, "Start/Pause/Cancel"lightwill flash. C If the machine is not spinning, the program may be in rinse hold mode or the automatic spin correction system has been activated because of unbalanced distribution of laundry in the machine. Changing the program after the program has started Starting the Program 1. Ifthe"Ready"lampdoesnotlightup continuously at the end of this time, the water level in the machine is not suitable andlaundrycannotbeadded. Youcan resume the program by pressing the "Start/Pause/Cancel"buttonagain. Ending the program through canceling Child-proof lock The program which is selected first will keep on going even if the position of the program selection button is changed. A new program can be selected or started after"Programiscancelled"inorderto change the washing program. Tocancelanyselectedprogram; · Press"Start/Pause/Cancel"button for 3 seconds. At the end of this time, "Start/Pause/Cancel"light andalllightsgooffand"Spin"lamp illuminates. If the door is unlocked, all lights on the indicator will go off andthe"Ready"lampwillilluminate. Youcanselectandstartanew programwhenthe"Ready"lightis lit. · The machine can drain all the water or can take in water for 3 times at most to cool down the clothes and complete the draining process. Also the"Spin"lightilluminatesifthe cancellation process is activated in the middle of the program. The"Spin"lightgoesoffwhen discharging process is completed. The door can be opened and a new program can be selected when the "Lid"lampilluminates. There is a childproof lock to prevent any program interruption because of pressing the keys while the program is on. In order to activate the childproof lock, press on the 1st and 2nd auxiliary function keys from the left simultaneously for 3 seconds after the washing program has started. [. . . ] The machine did not start after the program was The front door may be selected and ajar. the "Start/ Pause/Cancel" button was pressed. "Washing" and "Start/ Pause/Cancel" Water may have been cut lights are off. flashing after the program is started. Plugshouldbechecked. [. . . ]