User manual BELGACOM MAESTRO 2005

[. . . ] If the telephone should be wall-mounted, use the template and the enclosed screws. This button functions as "MUTE" ( ) during conversation. Press this button once and your voice will not pass through the microphone. [. . . ] Press VIP1 or VIP2 button followed by the desired phone number. You may enter ( ) or ( ) buttons into the dialling sequence just like the way you usually make calls to the desired phone number after you have picked up the handset. You may enter the PAUSE ( ) into the dialling sequence to insert a timed delay when necessary. TO MAKE A CALL WITH THE ONE-TOUCH MEMORY BUTTON To make a call with One Touch Memory, simply pick up the handset and wait for dialling tone, press the VIP1 or VIP2 button. Besides the One Touch Memory, the Maestro 2005 is also equipped with 10 two touch memory banks. Follow the instructions listed below to store a number (21 digits maximum) into the Two Touch Memory bank:- Press the MEMORY ( ) button followed by a numbered button from 0 to 9 to select memory bank position. You may enter ( ) or ( ) button into the dialling sequence just like the way you usually make calls to the desired phone number after you have picked up the handset. You may enter the PAUSE ( ) into the dialling sequence to insert a timed delay when necessary. TO MAKE A CALL WITH THE TWO-TOUCH MEMORY BUTTON To make a call with Two Touch Memory, simply pick up the handset and wait for dialling tone, press the MEMORY ( ) button followed by a corresponding numbered button. Do not expose this product to dust, strong sunlight, humidity, high temperature, or mechanical shock. Do not use corrosive or abrasive cleansers on this product. Keep the unit dust free by wiping it with a soft, dry cloth. Do not disassemble this product, it contains no user-serviceable parts. Make sure that all connection of coil cord and line cord are connected securely to the jacks. Push the hook switch once and wait for dialling tone again. If you have connected more than one phone to the same telephone line, make sure all other telephones connected are put on hook. In some telephone systems, when the first phone on the same telephone line are used, all other telephones are electrically disconnected. Try to connect another telephone to the telephone socket, if the problem persists, it appears that there is a problem with your telephone line system, consult your network provider. [. . . ] Your phone is built with 3 preset ringer melodies and loudness levels. To change the melodies and loudness level, follow the instructions listed below:1. Use the numbered button to make your selection of ringer melodies and loudness level combination. [. . . ]