User manual BELINEA 101710

[. . . ] [ USER MANUAL LCD-Monitor Belinea 10 17 10 ] BELINEA PREMIUM SERVICE English The three-year return to base warranty for your Belinea monitor includes all parts and labour. In addition many countries offer a free of charge swap out warranty programme. This does not affect your Statutory Rights. Please visit http://www. belinea. com or call the numbers below for further warranty or service information. [. . . ] Connect the 15-pin signal cable to the monitor and the PC (see fig. 2). 2 AC-IN AUDIO D-SUB 1 Signal cable AC-IN AUDIO D-SUB Figure 3. Connecting the monitor to the power source Connecting the audio cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . If your computer is equipped with an audio output port, then connect one end of the sound cable to the audio input connector of the monitor ( in fig. 3) and the other end to the Line-Out connector of the computer. Figure 2. Connecting the monitor to the PC To connect the monitor to the power source. . . . . . . . Connect the separate power cable ( monitor and a grounded outlet. First start your PC and then turn on your Belinea monitor using the power switch ( in fig. Adjust the image to meet your requirements (see the following sections "Basic Setup" and "Image settings using the OSD menu"). If there is no image displayed on the monitor, consult the section "Troubleshooting". Belinea 10 17 10 - Operating Instructions - 4 ENGLISH CONFIGURATION Monitor setup under Windows 9x/ME/2000 and XP: If using the monitor under Windows 9x/ME/2000 or XP, we strongly recommend installing the Belinea configuration file. You can obtain this file from your Belinea dealer or download it from the MAXDATA FTP server at ftp. maxdata. com. Here, click the "Belinea_Treiber_Driver" directory and download the Belinea. inf and README_Belinea. TXT files. Follow the installation instructions in the README_ Belinea. TXT file. Monitor setup under Windows NT 4. 0: Under Windows NT 4. 0 no separate setup file is required. Select the vertical frequency and the number of colors directly from within the "Settings" "Control Panel" "Display" "Settings" menu. BASIC SETUP Automatic Image Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . You can adjust the image settings (such as image position, phase, etc) manually or by using the LCD monitor's automatic image adjustment feature. This will adjust the image parameters to their optimal settings for the current graphics mode. The process will take a short while until completed. Disabling the sound (MUTE) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . You can mute or activate sound playback by pressing the - button ( in fig. 4) while the OSD menu is not displayed. IMAGE SETTINGS USING THE OSD MENU The OSD menu is a window on your screen that allows you to view and change display settings. When you have configured all colour values as wished, use the OSD key MENU ( in figure 4) to return to the OSD main menu. i Information Displays the current graphics resolution including the vertical frequency (no configuration possible). Image Horizontal Size: Controls the horizontal image size. [. . . ] The relevant TCO99 demand requires that plastic components weighing more than 25 grams must not contain flame retardants with organically bound bromine or chlorine. Flame retardants are allowed in the printed circuit boards since no substitutes are available. Cadmium* * Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. [. . . ]