User manual BELKIN F5D5730AU

[. . . ] At least one computer with either USB or Ethernet connection. TCP/IP networking protocol installed on the computer (most computers have this installed by default). Microsoft® Internet Explorer 5. 0 or Netscape® 4. 5 or greater installed. It may be necessary to disable any firewall or anti-virus software during installation. [. . . ] Use the scroll bar on the right-hand side of your screen; scroll down so you see the heading "PPP". 5. Enter the following personal details as given to you by your ISP: a. Service Name: Enter in the name of your ISP such as "xyz Internet provider". Username: As given to you by your ADSL provider. For New Zealand Xtra account holders, the user name always needs the extension ". xadsl" after the normal user name, and should be entered in the form of an e-mail address, e. g. Password: As provided by your ADSL provider, remember that passwords are case-sensitive. Disconnect timeout: Leave as default "0". MRU: Should be left as default "1492". MSS: Leave as default "1432". 9 INSTALLATION h. Authentication: Select "Auto". Automatic Reconnect: Should remain checked. Scroll down to the bottom of the screen and you will see the following. 7. Click the "Submit" button to update the changes and then scroll back to the bottom of the screen and then click on "Save Configuration". The screen will change and you will see the following. Click on "Submit" to make the change to the Modem. 9. The Modem will restart and the LAN connection will be reestablished between your PC and your Modem. You will see the following on your web browser. 10 INSTALLATION 10. When you see this screen, the Modem has rebooted and is ready to be connected to ADSL. 11. On the left of the screen under the Status settings in your browser, click on "PPP". You will then see the following. 11 INSTALLATION 12. Ensure that "Connect" is displayed in the drop-down window and then click on the "Execute" button. The Modem will initiate the connection to your ADSL provider and the screen shot will look similar to this one once connected. Note that under the "Status" column it will indicate "connected" once your ADSL connection is running. 13. [. . . ] The Modem will allocate a WAN IP address to your router and then you can configure the IP range that you wish to allocate to your client machines by configuring your router settings. Authentication to your ISP needs to be done on your Modem so simply connect you router to the Ethernet port of your Modem without running any setup wizards that may ship with the router. Where can I get help to connect my modem to Xtra New Zealand?THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. [. . . ]