User manual BELKIN F5D7630

[. . . ] ADSL Modem with Built-In 802. 11g Wireless Router Network your computers with this one-box solution that connects and shares your ADSL Internet access User Manual F5D7630-4A F5D7630-4B TABLE OF CONTENTS Introduction . 7 Connecting and Configuring your Router . 8 Navigating the Web Browser Interface . 14 Understanding the Web-Based User Interface . [. . . ] It is recommended that you disable the settings when you are not using a specific application. Client IP Filters The Router can be configured to restrict access to the Internet, e-mail, or other network services at specific days and times. Restriction can be set for a single computer, a range of computers, or multiple computers. 35 UNDERSTANDING THE WEB-BASED USER INTERFACE Access Control Access Control allows users to define the outgoing traffic permitted or denied access through the WAN interface. The default is to permit all outgoing traffic. To configure restrictive access to your computers, do the following: 1. Click "Add PC" on the Access Control screen. Define the appropriate settings for client PC services (as shown on the following screen). 3. Click "OK" and then click "Apply Changes" to save your settings. 36 UNDERSTANDING THE WEB-BASED USER INTERFACE URL Blocking To configure the URL Blocking feature, specify the websites (www. anywebsite. com) and or keywords you want to filter on your network. Click "Apply Changes" to activate the change. To complete this configuration, you will need to create or modify an access rule in the "Client IP filters" section. To modify an existing rule, click the "Edit" option next to the rule you want to modify. To create a new rule, click on the "Add PC" option. From the "Access Control > Add PC" section, check the option for "WWW with URL Blocking" in the Client PC Service table to filter out the websites and keywords specified. Schedule Rule You may filter Internet access for local clients based on rules. Each access control rule may be activated at a scheduled time. Define the schedule on the "Schedule Rule", and apply the rule on the "Access Control" page. 37 UNDERSTANDING THE WEB-BASED USER INTERFACE Follow these steps to add a schedule: 1. You will see the following screen. 3. To configure the Schedule Rule, specify the Name, Comment, Start Time, and End Time that you want to filter on your network. Click "OK" and then "Apply Changes" to save your settings. To complete this configuration, you will need to create or modify an access rule in the Client IP filters section. This activates the schedule for use in the "Access Control" page. MAC Address Filtering The MAC Address Filter is a powerful security feature that allows you to specify which computers are allowed on the network. Any computer attempting to access the network that is not specified in the filter list will be denied access. [. . . ] If not installed and used in accordance with the instructions, it may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the distance between the equipment and the receiver. · Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Modifications The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Belkin Corporation may void the users authority to operate the equipment. [. . . ]