User manual BELKIN F5U010BLU

[. . . ] The ExpressBusTM allows users to attach and use computer peripherals to their computers, without the need to reboot or run setup. Unlike many other hubs, the ExpressBusTM is both bus and self-powered. The self-powered feature allows for the cascading of devices with additional hubs allowing up to 127 different devices to be connected to a single USB port. [. . . ] Once it is determined that the devices are working properly unplug the AC adapter. If the devices continue to work properly you will not need the AC adapter. If they cease to function you will need the AC adapter. Connect the USB-A connector (please refer to Figure-2) of the USB cable into the downstream port of the PC or one downstream port of another hub. Connect the USB-B connector (please refer to Figure-3) of the USB cable into the upstream port of the ExpressBusTM USB hub. Connect the USB-A connector of the USB device, such as a mouse, keyboard etc. into any of the downstream ports of the ExpressBusTM. Features · Supports both OHCI (Open Host Controller Interface) and UHCI (Universal Host Controller Interface). · Provides seven downstream ports. · Both self-powered and bus-powered mode are automatically detected. · Per-port overcurrent detection and protection. · Universal Serial Bus (USB) Compliant. PORT 1 PORT 2 PORT 3 PORT 4 ROOT PORT PORT 5 Figure-1 Powered LED PORT 6 Software 1. No software is needed for Windows® 98; however for some versions of Windows® 95 release 2 you will need to use the software provided by the manufacturer of the device you want to connect. PORT 7 Per-port power LED ROOT PORT DC6V 4A Power Jack Figure-2 USB-A connector Figure-3 USB-B connector FCC/CE Statement This equipment has been tested and found to comply with the limits for a Class A & B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the hub. [. . . ] No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFIT, DOWNTIME, GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM OR DATA STORED IN OR USED WITH BELKIN PRODUCTS. Some states do not allow the exclusion or limitation of incidental or consequential damages or exclusions of implied warranties, so the above limitations of exclusions may not apply to you. [. . . ]