User manual BELKIN F5U122-PC

[. . . ] In addition, you may need to configure the network parameters. You may need your original Windows CD to complete the installation. Cable Connections Figure 2-1 illustrates the provided USB cable connection from the PC (A connector) to the adapter (B connector), and the provided standard Ethernet cable connection from the RJ45 connector on the adapter to an Ethernet port. When prompted in the installation procedure, follow any of the following connections: Figure 2-1: Basic PC-to-Ethernet Port Connection An Ethernet port is used to connect the adapter to an Ethernet environment. Such a port might be an Ethernet hub, network wall socket, peripheral device, cable modem, etc. 5 P73631_F5U122-PC-man. qxd 4/26/01 10:14 AM Page 6 Hardware Installation (continued) to Ethernet port USB Ethernet Adapter USB-B connector PC USB-A Figure 2-1: Basic PC-to-Ethernet Port Connection Figures 2-2, 2-3, and 2-4 illustrate sample applications fr o USB Ethernet Adapter PC Ethernet cross-cable Figure 2-2: PC-to-PC Direct Connections Note: Use and ethernet cross-cable between the two Ethernet adapters for this application. [. . . ] Insert the CD and select "OK" . 7 The "Add New Hardware Wizard" will indicate, "Belkin . USB Ethernet Adapter" and "Windows has finished installing the hardware device" Click "Finish" . 8 Windows will now prompt you to restart your . Click "Yes" to complete the installation. Once your computer has restarted, the Belkin USB 10/100 Ethernet Adapter will be active and working. If you are connecting to a cable modem or xDSL modem, follow the directions that came with your modem or from your Internet provider. If you are setting up a network, go to the section titled "Specifying TCP/IP Parameters" to configure your adapter. Windows® 2000 1 Close any Windows applications that you may be . 2 Insert the Belkin USB 10/100 Ethernet Adapter floppy . 3 Connect the USB cable to your computer and connect . 10 P73631_F5U122-PC-man. qxd 4/26/01 10:14 AM Page 11 Driver Installation (continued) 4 A window will appear telling you that Windows has . If this window does not appear, contact your PC vendor for assistance. 5 The "Found New Hardware Wizard" will appear. 6 The "Found New Hardware Wizard" will tell you "The . wizard will complete installation for this device: USB Ethernet Adapter" Select "Search for a suitable driver . for my device (recommended)" and click "Next" . 7 In the following window, place a checkmark next to . "Floppy Disk Drives" and uncheck all other selected locations and click "OK" . 8 The next window will indicate "The wizard found a . driver for the following device: USB Ethernet Adapter". 9 Next a window will pop up that says "Digital Signature . The next window will tell you "Windows has finished installing the software for this device". [. . . ] Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Belkin Components Limited Lifetime Product Warranty Belkin Components warrants this product against defects in materials and workmanship for its lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no charge, provided it is returned during the warranty period, with transportation charges prepaid, to the authorized Belkin dealer from whom you purchased the product. This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. [. . . ]