User manual BELKIN MOBILE NETWORK KIT

[. . . ] Starter Network Kit Share your files and Internet connection Professional Network Kit Share your files and Internet connection Mobile Network Kit Share your files and Internet connection *Actual product may vary from photograph Table of Contents Introduction . . 2-3 Connecting the Starter Network Kit and the Mobile Network Kit . . 4 Connecting the Professional Network Kit . . 5 Installing the Belkin Desktop Network Card . [. . . ] Under "Dial-up settings", choose "Dial whenever a network connection is not present". 8. 9. 33 Connecting to a DSL or Cable Modem 4. Click "OK" to close the window. You should now be able to open Internet Explorer and access the Internet at high speed through your DSL or cable connection. If your browser is unable to connect to the Internet, please contact your service provider for further information. Using dynamic addressing To access the Internet using dynamic addressing, configure the network settings for your computer as follows: 1. Open the Control Panel: click on the "Start" button, click on "Settings", and choose "Control Panel" from the menu that pops out. Double-click on the "Network" icon in the Control Panel to open the "Network" window. 34 Connecting to a DSL or Cable Modem 3. In the list of network components, click on the line that says: "TCP/IP ->32-bit PCI Fast Ethernet Adapter" ­or­ "TCP/IP -> Realtek RTL. . . " 4. Click on the "Properties" button to open the "TCP/IP Properties" window. Click on the "IP Addresses" tab. Select "Obtain an IP address automatically". Click "OK" to close the "TCP/IP Properties" window. 6. Back in the "Network" window, scroll through the list of network components. If "File and Printer Sharing for Microsoft Networks" is on the list, we strongly recommend removing it before using a DSL or cable modem connection. Using "File and Printer Sharing" makes it easier for other people on the Internet to access files on your computer without your knowledge or consent, with potentially harmful results. Check with your service provider for their own specific security recommendations. 35 Connecting to a DSL or Cable Modem 7. Click "OK" to close the "Network" window. Windows will ask you to restart your computer. Once you have restarted your computer, do the following: 1. Right-click on the "Internet Explorer" icon on your desktop to bring up its context menu, and select "Properties". Under "Dial-up settings", choose "Dial whenever a network connection is not present". Click "OK" to close the window. [. . . ] From the "Start" menu, go to "Run", type "A:\setup. exe", and click "OK". The screen will look something like this: 2. This will bring you to the "Welcome" screen of the Home Networking Wizard. Click "Next" and the following window will appear: 65 Software Internet Connection Sharing with Multiple PCs 3. [. . . ]