User manual BELKIN SURF N750

[. . . ] WIRELESS DUAL-BAND N+ ROUTER N750 DB User Manual F9K1103  8820-00778 Rev. A01 Table Of Contents Getting Started . 20 Enabling Auto Update on Your Belkin Router . 20 Updating Your Router via Your System Tray . [. . . ] If Belkin Setup does not run when you insert the CD-ROM, your computer may not be configured to open CDs automatically. If Belkin Setup does not appear within 15 seconds, browse to your CD-ROM drive and open the “Belkin Setup” icon. Alternatively, you may visit http://router/ and perform the setup manually. Please see “Manual Setup Using Your Browser” earlier in this manual for more information. Belkin Setup cannot find my Router. If Belkin Setup is not able to communicate with your Router during the installation process, please check the following items. 1. Make sure that the wireless hardware on your computer is turned on, if available. 2. Try connecting your computer to one of the four “wired” ports on the Router with an Ethernet cable. 4. Unplug the Router’s power supply for 10 seconds, then plug it back in. 5. There may be firewall software on your computer preventing an outgoing connection. You may choose to temporarily disable this software before attempting setup. If Belkin Setup still cannot find the Router, you might choose to do a manual setup. Refer to “Manually Configuring Network Settings” in this manual for details. 31 Troubleshooting, Support, and Warranty Belkin Setup cannot connect my Router to the Internet. If Belkin Setup is not able to connect the Router to the Internet, please check the following items: 1. Use the troubleshooting suggestions within Belkin Setup. 2. If your ISP requires a user name and password, make sure that you have typed in your user name and password correctly. Some user names require that the ISP’s domain may be at the end of the name. Example: “myname@myisp. com”. The “@myisp. com” part of the user name may need to be typed as well as your user name. 3. If you continue to have no Internet connection, refer to “Manually Configuring Network Settings” in this manual for an alternative setup method. Belkin Setup completed installation, but I cannot browse the Web. The light on the front of my Router is blinking amber. 1. Make sure the Router is connected to your modem with an Ethernet cable via the Router’s one WAN (modem) port. 2. Unplug the modem from its power source and make sure that it goes dark. 3. Unplug your Router’s power supply, wait 10 seconds, and plug it back in. [. . . ] Damaged equipment must remain available for inspection until the claim is finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under any existing insurance policies the purchaser may have. 42 Troubleshooting, Support, and Warranty How state law relates to the warranty. THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY. [. . . ]