User manual BELSON MH2014

[. . . ] 4) This page includes useful tips to help you load your dishwasher correctly and make the most of all the available space. 5) After loading the dishes, you need to select the right wash cycle and measure out the correct dose of detergent and rinse aid. Reading these pages will help you through all the wash phases. 9) Before washing anything in the dishwasher check the information provided by this section. [. . . ] You can modify the wash cycle in progress, if it has If opening the only just started. Open door soon the appliance door after the end carefully to avoid any hot of the program, or water splashes, then during it, stand away keep button "P" pressed from the Dishwasher, for approximately 5 to avoid possible seconds, until you hear a injury from hot steam. Indicator light "M" will come off and at this point, all the settings will have been cancelled. You are now free to re-set the correct wash cycle. Each time this button is pressed, one of the indicator lights "M" will come on in sequence, select the wash cycle you deem most suitable for the type of dishes to wash (take a look at page 7, where you will find the wash cycle table). Close the appliance door and after a few seconds, you will hear a short beep: the wash cycle has begun. The wash cycle stops and then restarts when the electricity comes back on or when you shut the door. Press button "E" before you start the selected wash cycle. A long beep will tell you that you have selected extra drying and the wash cycle will last longer in order to provide you with drier dishes. You can cancel the wash cycle in progress, if it has only just started. Make sure the wash cycle has ended before removing the dishes!Selecting the most suitable wash cycle for the load ensures clean dishes and a more convenient use of water and electricity. Dishwasher washing guarantees your dishes will be cleaned in a sanitized setting for safer, cleaner results. Salt, rinse aid, the right amount of detergent and the correct wash cycle: this is the formula to get the best results and to keep your dishwasher in shape To optimise consumption levels, try to use the dishwasher with a full load only. If it takes some time to fill up your dishwasher, use the soak cycle to avoid the formation of bad odours and caked-on food. &\FOH &\FOH VHOHFWLRQ LQVWUXFWLRQV &\FOH GHVFULSWLRQ 'HWHUJHQW IRU SUHZDVK  ZDVK 5LQVH $LG :DVK F\FOH GXUDWLRQ WROHUDQFH “ ZLWKRXW H[WUD GU\LQJ , QWHQVLYH :DVK Very dirty dishes and pans (not to be used for delicate items) Pre-wash with hot water at 95°F Wash at 140°F 2 cold rinses Hot rinse at 149°F Drying   R]  J  5HJXODU :DVK Cycle for normally dirty pans and dishes.  6RDN Rinsing cycle used while awaiting more dishes to be loaded from the next meal. Environmentally-friendly cycle, with low energy consumption levels, suitable for normally dirty pans and dishes. Short cold wash to prevent food from drying onto the dishes  (FR :DVK 2 Cold pre-washes Extended wash at 113°F Hot rinse at 149°F Drying   R]  J Us ARISTON DISHWASHER - User Manual 7 Water in your home Loading the salt. You can use special water softening salt or normal rock salt. The salt container is situated underneath the lower rack, fill it up as follows: 1. Pull out the lower rack completely, unscrew and remove the container cap 2. [. . . ] • leave the appliance door ajar This will help the seals last longer and prevent unpleasant odours from forming inside the appliance. Before carrying out any cleaning or maintenance on the dishwasher, always remove the plug from the electricity socket. To be moved, try to keep it To clean the exterior and in a vertical position. If rubber parts of your absolutely necessary, it can appliance, do not use be positioned on its back. [. . . ]