User manual BELSON MH2017

[. . . ] That the water inlet and outlet hoses are connected correctly; 3. That the dishwasher is level on the ground. It is worth it: for the longer life span and the correct operation of your dishwasher. 12) Learn to get to know the parts which make up your dishwasher, you will use it better for it. [. . . ] d Proper dosage of the rinse aid improves drying. If drops of water remain on the dishes or spotting occurs, turn the dosage adjuster to a higher setting. If, on the other hand, the dishes have white streaks, then turn the dosage adjuster down to a lower setting. You can choose from six different positions. Warning Three-in-one dishwasher tablets are now available on the market, and combine detergent, salt and rinse aid all in one. If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent the formation of white streaks on your dishes or on the interior of the appliance. Using a three-in-one product means it is no longer necessary to put rinse aid into the relevant container. If you want to achieve perfectly dry dishes, you may add rinse aid as long as the dosage adjuster is set to no. In any case, please read the manufacturer's instructions on the packet. If you use only these products, it is normal for the salt and rinse aid indicator lights to flash permanently after a certain number of cycles. ARISTON DISHWASHER - Instructions for installation and use 15 D ISHWASHER Select the right wash cycle A wash cycle for every degree of soil Salt, rinse aid, the right amount of detergent and the correct wash cycle: this is the formula to get the best results and to keep your dishwasher in shape Select the right wash cycle for your dishes. System with radiators) at a tempeOnce the appliance is positioned, rature of no more than 60°C. Adjust the feet by screwing them in In this case, the wash cycle time or out depending on how high you will be about 15 minutes shorter want it and to level it so that it is and the wash will be slightly less horizontal. If the The connection must be made to appliance is level, it will help ensure hot water supply following the Electrical connection. Same procedures as those indicated First of all, check that the mains for the cold water connection. Voltage and frequency values Anti-flooding protection correspond to those stated on the Your dishwasher is provided with a Drain hose connection. Rating plate located on the stainless special system which blocks the Fit the drain pipe into a drain line steel inner door of the appliance water supply in the event of leaks with a minimum diameter of 4 cm and that the electrical system to inside the appliance. Use the is sized for the maximum current Cold water connection. Special plastic elbow provided (see indicated on said rating plate. This electric household appliance figure) to position it in the best should be connected to the water possible way. The part of the pipe Earth: indispensable mains using the cold water supply marked with the letter A should be safety. Hose provided with the appliance between 40 and 100 cm above the Only now can you plug the only. [. . . ] Food residue may become encrusted onto the sprayer arms and block the holes where water comes out. Check the sprayer arms regularly and clean them once in a while (letters F and I Close-up view). C Keep your dishwasher in shape Respecting these few rules ensures you will always have a reliable work companion by your side. When the wash cycle has ended, When you go away for an extended always remember to turn off the period of time, we recommend you water supply tap and to leave the do the following: appliance door ajar. [. . . ]