User manual BELSON PT7441

[. . . ] and Canada This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. [. . . ] Use the lens span adjusters on the head mounted unit for adjustment. For details, refer to the "Startup Guide. " Notes · Without the lens span adjusted correctly, you cannot enjoy an optimal viewing experience. · Audio is muted during adjustment. · The volume cannot be changed during adjustment. 3D Settings Back Reset Returns to the previous menu. Resets all "3D Settings" items to the original default values. 18 3D Display Manually select the display format for 3D content. Available settings vary depending on whether the source signal includes a 3D format identification signal, as follows. For 3D content without a 3D format identification signal Over-Under: Select for top-and-bottom 3D content, with similar images displayed on top and bottom. Side-by-Side: Select for side-by-side 3D content, with similar images displayed side by side. Off: Select to display content in 2D format. For 3D content with a 3D format identification signal On: Select to display content in 3D format. Off: Select to display content in 2D format. Notes · If 3D content is not displayed correctly using the selected settings, try changing "Over-Under" to "Side-by-Side" or vice-versa. Off: Deactivates this function. Picture Brightness Color Temperature Sharpness Frame Noise Reduction Not available with 1080/ 24p frame packing format. Block Noise Reduction Not available with 1080/ 24p frame packing format. Mosquito Noise Reduction Not available with 1080/ 24p frame packing format. Cinema Conversion Not available with 1080/ 24p frame packing format. Clear Black Contrast Remaster 20 Wide Mode Not available during 3D playback. Normal: Displays the images at the original 4:3 aspect ratio. Full: Displays 4:3 content in full-screen, stretching the images horizontally. 16:9 content is also displayed full-screen, at the original aspect ratio. Zoom: Enlarges the images vertically and horizontally, preserving the original aspect ratio. Note · "Normal" is not available with HD input sources (1080i, 720p, or 1080p). Auto Display Area Not available during 3D playback. On: Automatically adjusts the picture to the optimal display area. +1: Displays images in the original display area. Normal: Displays the images in the recommended display area. ­1: Enlarges the images to cover screen edges. Use this option if there is distracting noise or image artifacts by the screen edges. Display Area Available only when "Auto Display Area" is set to "Off. " Sound Back Reset Surround Returns to the previous menu. Resets all "Sound" settings to the original default values. Standard: Provides standard surround-sound with moderate reverberation. Creates spacious soundstage for a range of content. [. . . ] Contact your Sony dealer or local authorized Sony service center. p If the indicator flashes three times every 3 seconds, the processor unit has overheated. Wait until the unit cools off and flashing stops. Make sure not to cover or obstruct the ventilation openings of the processor unit for proper ventilation. [. . . ]