User manual BELTRONICS BEL XR70

[. . . ] v995 manual-neltronics_310107. qxp 15/02/2007 2:57 PM Page 1 NELTRONICS HEAD OFFICE P. O Box 1469 Subiaco WA 6008 Tel: +61 8 9383 7833 Fax: +61 8 9383 7933 NELTRONICS NEW ZEALAND Private Bag MBE P152, Auckland, New Zealand Tel: +64 9 625 1645 Fax: +64 9 625 1629 2007 NELTRONICS Designed and Manufactured in Canada Feature, specifications and prices subject to change without notice. Model: XR70 v995 manual-neltronics_310107. qxp 15/02/2007 2:57 PM Page 3 Congratulations The Bel XR70 is one of the most advanced Radar Safety Detectors ever designed by Beltronics. The Bel XR70 includes: · Full K, Superwide Ka & Ku radar capability · Safety Warning System · Front & rear laster detection · Varactor-tuned (VTO) microwave receiver · Digital Signal Processing (DSP) for superior range and reduced false alarms · Patented mute and AutoMute · Audible and visual band alerts and all the performance you'd expect from Beltronics. In addition, the Bel XR70 introduces the following revolutionary features: · Varactor-tuned receiver provides long-range protection against all radar threats · New easy-to-use Programming lets you customize up to 7 features · New AutoScan mode intelligently reduces unwanted false alarms, plus Highway and City settings · Ultra-bright text-display provides easy to read information from any angle · New Tech Display provides actual numeric radar frequency for any radar signal · New Programmable Bands (on/off), including Ku-band for European travel. [. . . ] (The unit will display Complete, beep 4 times, and return to normal operation). 12 Overview of Programming An example Here is how you would turn XR70's AutoMute feature off. 1 Enter the Program Mode by holding both the CITY and BRT buttons down for 2 seconds. XR70 will beep twice and display Program. XR70 will scroll through the categories, starting with Pilot (Pilot), Voice (Voice), Power-on sequence (Pwr0n), Signal strength meter (Meter), and then AutoMute (aMute). 3 Release the RVW button when XR70 shows the AutoMute item. Since the factory setting is for AutoMute to be on, XR70 will display aMute 0n. (If you accidentally don't release the RVW button in time, and XR70 goes to the next category, hold the RVW button down again, and after XR70 scrolls through all categories, it will begin again at the top of the list. ) 4 Press the CHG button to change from aMute 0n to aMute 0FF. 5 To complete the Programming, simply wait 8 seconds without pressing any button, or press the PWR button. The XR70 will display Complete, beep 4 times, and return to normal operation. Press the REVIEW button to go from one category to the next PILOT (Power-on indication) VOICE POWER-ON SEQUENCE SIGNAL STRENGTH METER AUTOMUTE CITY MODE SENSITIVITY Pilot HWY Pilot H Pilot V Voice 0N Voice 0FF Pwr0n STD Pwr0n FST Meter STD Meter TEC aMute 0N aMute 0FF City STD City LoX City NoX Bands ALL Bands M0D Press the CHANGE button to change your setting within a category *Full word: Highway or AutoScan or City Letter: H or A or C Vehicle voltage *Voice alerts on Voice alerts off *Standard power-on sequence Fast power-on sequence *Standard signal strength meter Tech Display *AutoMute on AutoMute off *Standard City mode sensitivity No X band in XR70 No X band in XR70 *All bands enabled One or more bands are disabled How to use Programming BANDS * Factory Default Settings To reset XR70 to its original factory settings, press and hold the "CITY" and "BRT" buttons while turning the power on. XR70's display will provide a "Reset" message, accompanied by an audible alert, acknowledging the reset. 13 Turn bands "ON" or "OFF" by pressing the VOLUME/MUTE button K Ka P0P Ku LSR SWS 0N 0N 0N 0N 0N 0N or or or or or or 0FF 0FF 0FF 0FF 0FF 0FF (default is on) (default is on) (default is off) (default is off) (default is on) (default is on) v995 manual-neltronics_310107. qxp 15/02/2007 2:59 PM Page 17 Details of Programming Pilot (Power-on indication) o Note: When you are using the Dark mode, the display will only show HD, AD, or CD, (Highway-Dark, AutoScan-Dark, or CityDark). Pilot Hwy (Full description) In this setting, XR70 will display "Highway, " "City, " or "AutoScan" as its power-on indication. (factory default) Pilot H(Letter) In this setting, XR70 will display "H" for Highway, "C" for City, and "A" for AutoScan. Pilot V (Vehicle voltage) In this setting, XR70 will continually display "H" for Highway, "C" for City, and "A" for AutoScan, and the vehicle's voltage. If the vehicle's voltage drops below 10. 5 volts, a low voltage warning is displayed, followed by an audible alert. A high voltage warning is also given if the voltage goes above 16. 0 volts. The high-voltage warning is also followed by an audible alert. Voice 0n (Voice announcements on) In this setting, all radar, laser, and SWS messages (if programmed) will be announced using a digital voice. Voice 0ff (Voice announcements off) In this setting, only the distinct audio tone will be heard when a radar, Laser, or SWS message is detected. Pwr0nSTD (Standard) In this setting, each time you turn on XR70, it will display "Laser, " "Ka-band, " "K-band, " "X-band" followed by a brief alert. If any bands have been changed from the factory default settings, a double tone and corresponding message (i. e. "K OFF"), will alert you that one or more bands have been changed. [. . . ] · Check that vehicle ignition is ON. · Check that vehicle lighter socket is functional. · It is normal for XR70 to feel warm. XR70 feels very warm. XR70 did not alert when a police car was in view. XR70 did not provide a Safety signal while within range of an emergency vehicle. [. . . ]