User manual BENQ 46W1 DOCUMENT

[. . . ] Safety Guidelines: ------------------------------------------------------------------------------------- 1 Before Use:-------------------------------------------------------------------------------------------- 2 2. 1 2. 2 3. Open the Package Installation Safety -------------------------------------------------------------------------------------------------- 3 Product Features -------------------------------------------------------------------------------------- 9 Standard Components-------------------------------------------------------------------------------- 10 Names and Functions of Parts: --------------------------------------------------------------------- 11 6. 1 6. 2 6. 3 6. 4 Side View Front View Rear View Remote Controller PC Module PC Module + Video Module PC Module + Enhanced PC Module Connection to External Laud Speakers Power ON/OFF Selection of Input Mode OSD Option Adjustment Sound Adjustment Zooming of the Screen Other Functions OSD Functions 7. Connection to External Equipment----------------------------------------------------------------- 20 7. 1 7. 2 7. 3 7. 4 8. Basic Operation--------------------------------------------------------------------------------------- 24 8. 1 8. 2 8. 3 8. 4 8. 5 8. 6 8. 7 9. Optional Accessories--------------------------------------------------------------------------------- 33 10. Specifications ----------------------------------------------------------------------------------------- 34 11. Factory Settings--------------------------------------------------------------------------------------- 34 12. [. . . ] Note: When pressing this button to display "OSD Menu", the signal sources can be selected by using the / buttons. Wide: Press this key to switch to wide screen. Pressing this key again can restore the original size of the screen. : Use these keys to adjust "OSD Menu" up and down. : Use these keys to adjust "OSD Menu" left and right. Exit: Press this key to exit "OSD Menu". Zoom / Zoom : Use these keys to zooming the screen. Vol / Vol : Use these keys to adjust the volume. PIP: Use this key to adjust the size of the sub-picture in the following sequence: Sub-picture open (small)Screen (middle)Screen (large)Sub-picture closed (circular display). Freeze: Press this key to suspend the current screen. The playback system keeps playing when the screen is frozen. You may press this key again to continue playing or resume play automatically after one minute. Mute: Press this key to mute the laud speakers. Press it again to restore the audio output. 17 6. 4. 2 Insertion of Batteries: Press here 1. 3. As shown in the above figure, press the position pointed out by the arrow and push the cover out of its location. 4 batteries in the remote controller as shown in the above figure. Re-assemble the cover in a reversed procedure and confirm the fastener of the cover has fixed in the right position. 6. 4. 3 Scope of Remote Control: 6M(Front) 18 Make the remote controller point to the remote control window (i. e. the window showing the power indication) of the Display to receive the signals transmitted from the remote controller. No obstacles shall be placed between the remote controller and the remote control window. The effective receiving scope of the signals is 6 meters to the front of the remote control window, each 30 to the left and right sides and each 20 to the top and bottom of the control window. To ensure a normal operation, the remote controller shall not be stricken or fall on the ground. It shall also be kept dry and away from heat sources. [. . . ] C Check that the power of relevant peripherals are turned on. C Check that the OSD option selected matches with the input signal. The remote controller doesn't C Check that the polarity of the battery is correct. C Check that the batteries do not exhaust. [. . . ]