User manual BENQ DC 1016

[. . . ] · Do not use organic solvents, such as alcohol, etc. , to clean your camera. · If the lens or viewfinder is dirty, please use the lens brush or soft cloth to clean the lens. Do not touch the lens with your fingers. [. . . ] You can use this application program to easily manage your pictures. PhotoBase A desktop shortcut of the program is automatically created after successful installation. Restart your computer when you have finished installing all of the above software. Using the Camera Using the Camera Taking Pictures Hold the camera and look through the viewfinder and set up your picture. When looking through the view finder, keep it approximately 30 cm from your eye. Adjust size of your composition by increasing or decreasing distance between camera and subject but not nearer than 1 meter. 30 cm (12 inches) 1m (40 inches) Press the Shutter button to take a picture of your subject. The LED indicator will be on and a short beep sound emits at each click of the shutter to confirm that a shot has been taken and the camera is ready to take the next picture. Using the Camera Other Modes of Operation Shooting Mode This mode of operation allows you to take lower-resolution images. To set your camera into Shooting mode: Repeatedly press the Function Mode button until the " " icon is displayed on the LCD Display Panel. This indicates that the Shooting mode is ready and also shows the number of pictures you can take is between 100 and 199. Shooting mode is ready only when the LCD Panel displays the " " icon. Repeatedly press this Function Mode button until the " In the shooting mode, the " between 0 and 99. The " " icon is displayed. " icon means the number of pictures you can take is " icon means the number of pictures you can take is between 100 and 199. The " " icon means the number of pictures you can take is between 200 and 299. Accordingly, you can deduce the rest icons by analogy. For examples, the " " icon means the number of pictures you can take is between 800 Using the Camera and 899. The " " icon means the number of pictures you can take is between 900 " icon means the number of pictures you can and 999. But please note that the " take is larger than 1000. Please note that if the " " icon appears, it means some "unknown errors" cause the camera unable to function nomally. There are two ways to solve this problem, you can press "Power" button to pass (ignore) it or you can also press "Shutter" button to format your camera memory. Using the Camera Self-Timer Mode The Self-Timer mode of operation allows a 10 seconds shutter release delay after pressing the Shutter button. Mount the camera on the cradle when operating under Self-Timer mode. [. . . ] Before you can use the pictures in camera, you need to connect the camera to your PC. Refer to the graphic 1on page 12 to insert one end of the USB cable into the camera's USB port, and the other end to the USB port of your PC. Or, you can insert the digital camera directly into the USB port of your PC. [. . . ]