User manual BENQ DC 1300

[. . . ] BENQ Digital Camera 1300 Electronic User's Manual Introduction to Benq Digital Camera 1300 1 Touring Your Camera 2 Preparing the Camera for Using 5 Installing batteries and strap 5 Installing Digital Camera Software 6 Using Your Camera 8 The digital camera mode 8 Taking pictures 8 Managing photos in camera 11 The continuous shooting mode 13 The video camera mode 14 The sound recording mode 15 The PC camera mode 16 Options 18 Troubleshooting Tips 25 Service Information 26 Copyright Copyright (c) 2002 by Benq Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without prior written permission from Benq. Brands and product names are trademarks or registered trademarks of their respective companies. Disclaimer Benq makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Benq assumes no responsibility for any error that may appear in this document. [. . . ] You can choose to let the counter display in another way. If the battery power becomes low, the battery icon will become empty. : This icon indicates the DC 1300 is in digital camera mode. You can change the mode setting by pressing the Power/ Mode button. : This icon indicates the flash mode is set to flash off mode. You can change the flash mode setting by pressing the Flash/ Enter button. : This icon indicates the compression setting is set to "Fine". You can change the compression setting by pressing the Pix/ _ button. : This icon indicates the resolution setting is set to "1280 X 1024". You can also change the resolution setting by pressing the Pix/ _ button. Look through the viewfinder to determine the object to be taken. Make the object appear in the center of the viewfinder. Make the object appear in the center of the viewfinder. 9 4. The image will be taken with a beep sound and the BUSY indicator will flash, indicating that the camera is saving the image to memory. When the indicator becomes off, you are ready to take the next photo. Note: Do not press the POWER button when the BUSY indicator flashes. After the shutter is pressed, hold the camera still until the BUSY indicator becomes OFF to prevent blurred images. To save battery power, if the camera power is turned on and not used for 1 minutes, it will be turned off automatically. 4. 1. 2. Turning off the camera Press and hold the POWER button of the camera for 3 seconds. The camera beeps once and the power will be turned off. 10 4. Deleting the last photo taken Press the "Power/ Mode" button 4 times. It indicates the camera is in Erase Press the "Flash/ Enter" button, the camera will beep once and the BUSY indicator will flash, then the last photo taken will be deleted. 4. 1. 3. 2. Deleting all photos When in Erase mode, you can choose to delete the last photo or all the photos saved in the memory of camera by pressing the " WB/ +" button or "Pix/ _ " button. 11 4. [. . . ] To enable self-timer: Press the Power/ Mode button 5 times. The self-timer icon will appear on the status display. Press the shutter and the camera will start generating beep sound. The self-timer activation indicator on the front panel and the busy indicator on the rear panel will both blinks simultaneously. After10 seconds, the camera will take photos automatically. 22 4. Pixel Setting The pixel setting function allows you to let the camera take pictures in different compression and resolution. [. . . ]