User manual BENQ DC 2110

[. . . ] Digital Camera 2110 User's Manual Copyright Copyright (c) 2002 by Benq Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without prior written permission from Benq Corporation. Brands and product names are trademarks or registered trademarks of their respective companies. Disclaimer Benq makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Benq assumes no responsibility for any error that may appear in this document. [. . . ] When it stops blinking it means the flash is charged and is ready for the shooting. Under normal operating conditions, the charging time for the flash is under 10 seconds. Yet if the batteries are weak, the charging time will be longer. 5 Benq DC 2110 User's Manual 3. USING THE DC 2110 The functions of DC 2110 are mainly composed of five modes-Recording mode, Playback mode, Video Mode, Setup Mode and PC Connection Mode. In this chapter, we will introduce the functions of DC 2110 according to these five modes. 3. 1. Recording Mode Recording Mode ( ) This mode is used to capture still images. Please set the Mode Dial at this mode if you would like to capture still images. The normal focus range is 0. 6m~infinity. Yet if you would like to take a close-up shot please press the Macro Button which the focus range is 0. 2m~0. 6m. Recording Mode Menu Set the Mode Dial at Recording Mode ( ) and press the MENU/ENTER Button. Use the Up and Down Direction Button to choose the item you would like to make change and use the Right & Left Direction Button to change the setting. And after that please press MENU/ENTER Button to confirm the setting. Mode Recording Mode Description Quality EV Compensation White Balance Resolution Self-timer Digital Zoom Item Superfine Fine Normal -1. 8 ~ -1. 3 ~ 0 ~ +1. 3 ~ +1. 8 AUTO DAYLIGHT FLUORESCENT TUNGSTEN 2048 X 1536 1600 X 1200 800 X 600 OFF ON OFF ON Quality The symbol "" means "Super Fine" quality which means low compression rate. The symbol " " means "Fine" quality which means normal compression rate. The symbol " " means "Normal" quality which means high compression rate. EV Compensation This feature allows you to increase or decrease the exposure compensation value. The higher the exposure compensation value is the brighter the image will be. The set EV value will stay until the power is off. When the power is back on, the value will return to 0 EV automatically. 6 Benq DC 2110 User's Manual White Balance The camera is preset at "Auto" if you are not capturing the images in special light conditions. There are four modes to select which are: Auto Daylight Fluorescent Tungsten Resolution There are three resolutions for you to select which are 2048 x 1536, 1600 x 1200 and 800 x 600. Self Timer Using this feature will delay the shutter release for about 10 seconds. Set to "ON" and press MENU/ENTER Button. Then press Shutter Button to start the self-timer. [. . . ] Normally, a software installation menu appears automatically after this installation CD is inserted into your CDROM drive. · Click on each item to start installing the software program of your choice. If the menu did not appear, please browse the CD and find a program file named "setup. exe" in the root directory and double-click on it. If you want to know the content of this CD and install software manually, please refer to the descriptions of the CD content below. 14 Benq DC 2110 User's Manual 4. 2. The Software of this Installation CD Software 1. [. . . ]