User manual BENQ DC 300 MINI

[. . . ] Benq makes no commitment to update nor to keep current the information contained in this document. Taking care of your camera · Do not use your camera over the following environmental range: temperature: O C to 40 C, relative humidity: 45% ~ 85%. · Do not use or store your camera in environments listed below: Direct sunlight. Next to the air conditioner, electric heater or the other heat sources. In a closed car that is directly under the sun. [. . . ] To enter the setting menu, press the Menu/C button and you can switch the LCD screen frame from shutter menu to the main setting menu. Press this button to enter the setting menu. The menu bar will appear on the left part of the LCD screen. Menu operations · Push up or press down the navigation button to move among main items or highlight a main item on the menu bar. · To go to the sub-menu of a main item, press the right arrow tion button, or the Disp/OK button. · To select an item, highlight the item you want to select and then press the Disp/OK button. · To exit a submenu, press the left arrow on the navigation button, or the Menu/C button. After your settings finished, press this button to return to the normal LCD preview screen. on the naviga- 14 Benq DC 300 MINI User's Manual 3. 5. 1. Adjusting image compression You can take photos at different compression. Lower compression delivers more image details, but results in larger file size. This will also affect the remaining images that can be taken in the memory card. To select image compression: Enter the image compression sub-menu. Select a image compression mode: Fine: Image with low compression (1:8). Normal: Image with high compression (1:16). Press the Disp/OK button. To set monochrome modes: Select item and press Disp/OK button. The monochrome mode adjust- ment screen will appear. Select a monochrome mode and the result will appear on the LCD screen instantly: Color Mode: The LCD color will remain colorful. Sepia Mode: The LCD color will become sepia. Black and White Mode: The LCD color will become black and white. Press the Disp/OK button. The monochrome mode is set. 18 Benq DC 300 MINI User's Manual 3. 5. 6. Setting metering modes This main item allows you to adjust metering modes. The metering system in digital camera is the system which measures the amount of light in the current frame and calculates the best-fit exposure. All you have to do is select the metering mode, point the camera and press the capture button. To set metering modes: Select item screen will appear. The metering mode adjustment Select a metering mode: Center Mode: Center metering also allows you to meter for the subject in the center of the frame but the range increases. It's about 50% the area of the whole frame and the rest of the frame is ignored. Point (Spot) Metering Mode: Point metering allows you to meter for the subject directly in the center of the frame. [. . . ] LITHIUM BATTERY CHARGER (ADAPTER) USAGE Preparations The DC 300 MINI package provides a lithium battery charger for charging your DC 300 MINI lithium battery. In addition, the charger can also be used as an power adapter to supply electric power to your DC 300 MINI. To use the lithium battery charger as a camera power adapter, you need to connect the charger to your camera DC 300 MINI. Power plug "+" "-" contact parts DC header Charge indicator Power cord Power indicator 38 Benq DC 300 MINI User's Manual 6. 1. [. . . ]