User manual BENQ FP92W

[. . . ] 1. FP92W 19" Wide-Screen LCD Monitor User Manual Welcome 1. Copyright Copyright © 2006 by BenQ Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation. 2. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. [. . . ] You could then print it out for reference if you wish to work off-line. When you're ready, Cancel the browser as it is not required for the Windows Upgrade Device Driver Wizard. 2. Launch the Windows Upgrade Device Driver Wizard and click Next. Check the option `Display a list of known drivers. . . ' and click Next. Click the Have Disk button. The Install From Disk window will display. 5. Click the Browse button and navigate to the BenQ LCD Monitor CD-ROM. This is the CD you loaded in step 1 above. The CD Drive will have a Windows designated drive letter (like D: or E: or F:). Select the drive letter corresponding to the drive you put the CD into. 6. Double-click the folder labelled `Driver'. The contents of the `Driver' folder will display. 7. Click the Open button. This will return you to the Install from Disk window, and it will have entered the address to the BenQ LCD Monitor CD `Driver' folder into the field titled `Copy manufacturer's files from:'. The field will contain something like, "D:\Driver", or "E:\Driver", or "F:\Driver". 8. Click the OK button. This will return you to the Upgrade Device Driver Wizard. 9. Select (single-click) the file named BenQ FP92W, and click the Next button. Click Next. This will copy the appropriate monitor driver files to your computer. 11. Click Finish. On Windows 2000, this will close the wizard and return you to the Monitor Properties window, now renamed `BenQ FP92W Properties'. Should you wish to do so, this is where you can change the screen refresh rate and other monitor properties to suit your needs. See How to adjust the screen refresh rate on page 21 for details. 12. In Windows 2000, click Close. This will close the BenQ FP92W Properties window and return you to the Advanced Display Properties window. 13. In Windows 2000, click OK. This will close the Advanced Display Properties window, and return you to the Display Properties window. Should you wish to do so, this is where you can change the screen resolution (area and color). See How to adjust the screen resolution on page 20 for details. 14. Click OK. This will close the Display Properties window, and if you made any changes to the screen resolution, Windows 2000 will prompt you for confirmation to effect the changes, and further confirmation to accept the changes. [. . . ] Information Displays the current monitor property settings. Reset All Resets all mode, color and geometry settings to the factory default values. Press the ENTER key to select this option. Press the t or u keys to adjust the value. · YES · NO 32 How to adjust your monitor 9. [. . . ]