User manual BENQ GW2250E

[. . . ] The socket outlet should be installed near the equipment and be easily accessible. • This product should be operated from the type of power indicated on the marked label. If you are not sure of the type of power available, consult your dealer or local power company. • An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0. 75mm2 must be used. Care And Cleaning • Cleaning. [. . . ] Click Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is the drive letter designator for the CD-ROM drive). The drive letter for your CD drive may differ from the example above depending upon your system - it may be 'D:' or 'E:' or 'F:' etc. 9. Select the correct folder name of your monitor from provided driver list, and click Next. This will copy and install the appropriate monitor driver files to your computer. 10. Click Close. You may be prompted to restart your computer after the driver update is complete. Getting the most from your BenQ monitor 19 How to install on Windows Vista systems 1. Open Display Settings. Right-click the desktop and select Personalize from the popup menu. Select Display Settings from the Personalize appearance and sounds window. The Display Settings window will display. 2. Click the Advanced Settings button. The Generic PnP Monitor Properties window will display. 3. Click the Monitor tab and the Properties button. Click Continue in the prompted User Account Control window. Click the Driver tab and the Update Driver button. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer. To assist you in this endeavour, BenQ has provided a screen test image utility which you can use to check for screen color, grayscale and line gradient display. Run the test program auto. exe from CD-ROM. You could also use any other image, such as the desktop of your operating system. However, we recommend that you use auto. exe. As you run auto. exe, a test pattern displays. Press any of the control keys to bring up the hot key menu. If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), select Pixel Clock and adjust the monitor until the noise disappears. If you notice a horizontal noise, select Phase and adjust the monitor until the noise disappears. Customizing the hot keys The top 3 control keys (also called custom keys) perform as hot keys to provide direct access to pre-defined functions. You can change the default setting and designate different functions for these keys. Press any of the control keys to bring up the hot key menu, and press Menu to access the main menu. Select the custom key you want to change. [. . . ] If the image is still not correct and the OSD also has faulty coloration, this means one of the three primary colors is missing in the signal input. If any pin is bent or broken off, please contact your dealer to get necessary support. Is the prompt on the display illuminated in green?If the LED is illuminated in green and there is a message Out of Range on the screen, this means you are using a display mode that this monitor does not support, please change the setting to one of the supported mode. [. . . ]