User manual BENQ JOYBEE 200

[. . . ] Joybee 200 MP3 Player User Manual Welcome Copyright All rights reserved. No part of this publication may be reproduced, transmitted, recorded, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, recording, photocopying, or otherwise, without the prior permission of the BenQ Corporation. Disclaimer The BenQ Corporation shall make no warranty or representation, either expressed or implied, with respect to the quality, accuracy or fitness for any particular purpose of this document. The information in this document is subject to change without notice. The content of this manual has been checked and proofread prior to publication. [. . . ] Use the or keys to select the desired channel and the key to confirm your selection. FM 4. Use the VOL or VOL buttons to increase or decrease the volume as desired during playback. The LCD screen shows the volume setting when you change the volume. VOL 15 25 Saving preset channels in memory Follow these steps to save your favorite radio stations for quick access. When listening to your favorite channel, press and hold the MODE key for 2 seconds to display a pop-up menu. or FM Save to CH 01 keys to choose a channel number 3. Press the key to confirm your selection. The current channel is saved to the location you specified. Recording FM radio Follow these instructions to use the Joybee 200 to record from the FM radio. Do not turn off the Joybee 200 or connect or disconnect it from a PC while recording. 1. When listening to your favorite channel, press the REC key to start recording. Press the key to pause recording and press it again to resume recording. FM 92. 1 MHz FM 32K REC 3. Press and hold the key for 2 seconds to stop recording. Alternatively, you can also press the 32KHz stop recording. REC key again to All recorded radio programs are saved as MP3 files with filenames such as FM0101. The number at the end of the filenames refers to date and the order in which the programs were recorded. These files are saved in the Radio folder on the Joybee 200. Use the procedure described in "Playing back recorded audio files" on page 28 to listen to your recorded programs. The repeat play, multiple playback speeds, and 26 equalizer functions are also available when you play back a recorded program. Refer to "Repeat play" on page 23, "Selecting an EQ mode" on page 24, and "Selecting a playback speed" on page 24 for more details. Using the recorder function The Joybee 200 has a recording function to enable you to record your voice using the built-in microphone or an external audio signal as follows. · Recording function will be disabled when the battery is low. 1. Press the key to start recording and speak into the microphone. Press the key to pause recording and press it again to resume recording. Press and hold the key for 2 seconds to stop recording. Refer to "Setting the recording options" on page 30 for more details about setting the recording parameters. All recorded programs are saved as MP3 files with filenames such as MIC0101 or LINE0101. The prefix indicates the source of the recording and the number at the end of the filenames refers to date and the order in which the programs were recorded. These files are saved in the MICIN or LINEIN folders on the Joybee 200. Use the procedure described in "Playing back recorded audio files" on page 28 to listen to your recorded programs. [. . . ] Press on the right panel of QMusic in the function button area. 56 4. In the Option dialog box shown, click the Joybee tab. 5. Select Automatically launch QMusic when Joybee added under Launch Settings and Automatically transfer MP3 files to Joybee when added under 57 Update Settings. Click the save your settings. button to 6. [. . . ]