User manual BENQ PB9200

[. . . ] PB9200 Digital Projector Ceiling Mounting Guide Welcome Copyright Copyright 2004 by BenQ Corporation. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company. Disclaimer BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of this company to notify any person of such revision or changes. Safety Instructions 1. [. . . ] Do not install the projector in a location that is exposed to direct sunlight or in a location that is subject to extreme fluctuations in temperature (such as near an air conditioner). Special techniques and experience are required when installing the projector with this bracket. It is recommended that you contact your dealer to install the projector for you. Once the projector is installed, safety checks should be conducted on a regular basis. Table of Contents Packing Parts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Projector Installation and Throw Distance Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installing a Projector with The Ceiling Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Adjusting the Ceiling Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Specifications and Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2 Copyright Packing Parts List U-PLATE CEILING ADAPTER M4 SCREWS x 4 TUBE NUTS x 4 PIPE SQUARE TUBE ADJUSTMENT ASSEMBLY PROJECTOR ADAPTER M3 SCREWS x 4 M6 SCREWS x 4 BOLTS x 7 (TUBE BOLTS x 2, L ­ ADJUST BOLT x 2, TUBE BOLTS x 2) Names of Parts U - PLATE CEILING ADAPTER M4 SCREWS x 2 TUBE TUBE BOLTS x 2 NUTS x 4 L-ADJUST BOLTS x 2 TUBE TUBE BOLTS x 3 SQUARE TUBE M4 SCREWS x 2 ADJUSTMENT ASSEMBLY M3 SCREWS x 4 M6 SCREWS x 4 PROJECTOR ADAPTER Packing Parts List 3 Projector Installation and Throw Distance Chart Ceiling Installation for a 4:3 screen A B A [inc h [inc h (m)] (cm)] 40(1. 0) 24(61) 60(1. 5) 36(91) 70(1. 8) 42(107) 80(2. 0) 48(122) 100(2. 5) 60(152) 120(3. 0) 72(183) 150(3. 8) 90(229) 200(5. 1) 120(305) 250(6. 4) 150(381) 300(7. 6) 180(457) 350(8. 9) 210(533) 400(10. 2 ) 240(610) 500(12. 7 ) 300(762) C [inch (m)] min . max. 46 (1. 2 ) 71(1. 8) 12(30) 24(61) 71(1. 8) 107(2. 7) 18(46) 36(91) 83(2. 1) 126(3. 2) 21(53) 42(107) 95(2. 4) 144(3. 7) 24(61) 48(122) 120(3. 0) 181(4. 6) 30(76) 60(152) 144(3. 7) 217(5. 5) 36(91) 72(183) 181(4. 6) 272(6. 9) 45(114) 90(229) 243(6. 2) 364(9. 2) 60(152) 120(305) 304(7. 7) 455(11. 6) 75(191) 150(381) 366(9. 3) 547(13. 9) 90(229) 180(457) 427(10. 9 ) 638(16. 2) 105(267 ) 210(533) 489(12. 4 ) 730(18. 5) 120(305 ) 240(610) 612(15. 5 ) 913(23. 2) 150(381 ) 300(762) Floor Installation for a 16:9 screen A B B There is 3% ~ 5% tolerance among these numbers due to optical component limits. * 1 m = 3. 28 feet, 1 feet = 0. 305 m, 1 m = 100 cm, 1 foot = 12 inches 4 Projector Installation and Throw Distance Chart C C D D B B B [inch (m)] 40(1. 0 ) 60(1. 5 ) 70(1. 8 ) 80(2. 0 ) 100 (2. 5) 120 (3. 0) 150 (3. 8) 200 (5. 1) 250 (6. 4) 300 (7. 6) 350 (8. 9) 400 (10. 2) 450 (11. 4) [inch (cm)] 20 (50) 29 (75) 34 (87) 39 (100) 49(125) 59(149) 74(187) 98(249) 123(311) 147(374) 172(436) 19 6(498) 22 1(560) C [inch (m)] min. max . 50(1. 3) 77(2. 0) 91(2. 3) 104(2. 6) 131(3. 3) 158(4. 0) 198(5. 0) 265(6. 7) 332(8. 4) 399(10. 1) 466(11. 8) 533(13. 5) 600(15. 2) 77(2. 0) 117(3. 0) 137(3. 5) 157(4. 0) 197(5. 0) 237(6. 0) 297(7. 5) 396(10. 1) 496(12. 6) 596(15. 1) 696(17. 7) 795(20. 2) 895(22. 7) 10(25) 15(37) 17(44) 20(50) 25(62) 29(75) 37(93) 49(125) 61(156) 74(187) 86(218) 98(249) 110(280) 23(58) 34(87) 40(102) 46(116) 57(145) 69(174) 86(218) 114(291) 143(363) 172(436) 200(508) 229(581) 257(654) Installing a Projector with The Ceiling Bracket Overview Diagram of completed installation Ceiling Mount Device Installation Procedure Insert the U-PLATE into the CEILING ADAPTER, and tighten two M4 SCREWS (from the bottom) STEP A into the screw holes. Then attach the top part to the ceiling. U-PLATE CEILING ADAPTER M4 SCREWS Ceiling mount screws (not included) Installing a Projector with the Ceiling Bracket 5 STEP B Install the TUBE and the U-PLATE with 2 sets of BOLTS & NUTS (TUBE BOLT). NUTS x 2 TUBE BOLTS x 2 TUBE STEP C Install the PIPE and the TUBE with 2 sets of BOLTS & NUTS (L-ADJUST BOLT). NUTS x 2 L-ADJUST BOLTS x2 PIPE STEP D Install the base-assembly. STEP D1 Combine the SQUARE TUBE and the PIPE with 2 BOLTS. STEP D2 Install the ADJUSTMENT ASSEMBLY to the SQUARE TUBE with one BOLT and 2 M4 SCREWS. BOLT M4 SCREWS 6 Installing a Projector with the Ceiling Bracket STEP E Assemble the PROJECTOR ADAPTER and PROJECTOR with 4 M6 SCREWS. M6 SCREW STEP F Slide the projector with adapter into the ceiling assembly and fix the projector with 4 M3 SCREWS. Ceiling mount bracket M3 SCREW BASE-ASSEMBLY Installation finished. Installing a Projector with the Ceiling Bracket 7 Adjusting the Ceiling Bracket Height Adjustment 1. Make sure to remove the projector first. Loosen the nuts securing to the two L-ADJUST BOLTS. Remove the L-ADJUST BOLTS from the PIPE. Adjust to the correct position for the height of the screen. The height can be adjusted to 309 mm or any value in a range between 639 mm and 849 mm in increments of 30 mm. Insert the L-ADJUST BOLT back into the PIPE, and then re-attach the nuts previously removed. 5. Maximum Height (non-adjustable) Minimum Height (non-adjustable) 849 8 Adjusting the Ceiling Bracket Horizontal Angle Adjustment 1. [. . . ] Adjust the angle so that it is correct for the orientation of the screen. The swing angle can be set within a range of negative to positive 30 degrees. M4 SCREW M4 SCREW Adjusting the Ceiling Bracket 9 Specifications and Diagrams Specifications Adjustment Range Height Horizontal angle Vertical angle Swing angle Weight Loading 309 mm, 639 mm, 669 mm, 699 mm, 729 mm, 759 mm, 789 mm, 819 mm and 849 mm. ­30 to +30 degrees -5 to +30 degrees -15 to +15 degrees 4. 2 kg 4. 5 kg Diagrams Left View Front view Right view 10 Specifications and Diagrams [. . . ]