User manual BENQ VP150X

[. . . ] ULTRA PORTABLE PROJECTOR VP150X USER'S GUIDE Thank you for purchasing Benq Ultra Portable Projector. Please read this user's guide to ensure correct use of the device. Save this user's guide for future reference. OUTLINE This Ultra Portable Projector can display various computer signals and NTSC/PAL/SECAM video signals. FEATURES 1. Compact Size, Light Weight for Portability 5. [. . . ] i-key Source Standby/On Standby/On indicator Lamp status indicator To adjust position, phase automatically. Functions as an indicator showing the standby status. Lights or blinks when the lamp does not light. B Remote Control LED STANDBY/ON SOURCE LASER MENU MOUSE FREEZE EXIT PAN BLANK L-CLICK DRAG R-CLICK MAGNIFY RETURN VOLUME i -KEY Figure 14. Remote control Operation 9 The remote control allows you to operate the function keys on the projector and to emulate mouse function when the projector is connected to a computer. Main Unit Standby/On Freeze Magnify Function To turn the projection lamp on and off. Pressing this button displays a still (frozen) picture. Pressing this button partially magnifies a displayed picture. (Move the picture with the Disk Pad after pressing the Magnify button. ) Disk Pad When the OSD menu is active, Disk Pad acts as selecting device. When the on-screen menus are not active, it works as mouse pad. When the magnify function is active, use disk pad to move through the picture. The blank screen is displayed by pressing Blank. And the blank screen will be revealed partially from top to bottom by pressing Blank again. The sound gets louder or quieter by pressing the "+" or "-" button. When operating in mouse emulation mode, it registers a left mouse click. When operating in mouse emulation mode, it registers a right mouse click. To adjust position, phase automatically. Menu Blank Source Return Volume Laser Mouse Left-Click Mouse Right-Click Exit i-key Inserting Batteries in the Remote Control Be sure to follow instructions in placing batteries into the remote control units. Push and slide the lid in the direction of the arrow. Install two `AAA' batteries as indicated inside the battery compartment. Replace the lid and snap into place. Caution Avoid excessive heat and humidity. Do not mix new and old or different types of batteries. Figure 15. Battery replacement process 10 English Remote Control Range The remote sensors are located on the back of the unit. It can function in a range 50 degrees horizontal and 30 degrees vertical relative to a line that is a right angle to the remote sensor. The distance between the remote control and remote sensor must be shorter than four meters (13 feet). Up Right Left Down Figure 16. [. . . ] Magnify Laser Disk Pad Press this button to generate the laser beam. If users connect the PS2 (ADB) mouse cable on the projector with the PC/Notebook (Macintosh/ Powerbook) mouse port, the disk pad will be able to function as a PC/Notebook (Macintosh/ Powerbook) mouse. When an image has been magnified, press the Disk Pad button to move around the display area (the mouse function is not available when magnify function is on). This button is a toggle to turn on/off the drag function of the remote mouse. [. . . ]