User manual BERNEX GB11108 CATALOGUE 2010

[. . . ] They are to be read and used by anyone assigned to service and repair malfunctions in the Power Pack. Keep these operating instructions and hand them over with the Power Pack to any future owners. copyright This documentation is copyright protected. Any duplication and/or reproduction wholly or partially including reproduction of the illustrations, also in a modified form, is only permitted with written authorization from the manufacturer. [. . . ] One to three of the charging indicator 1 LEDs light up and thus shows the current rechargeable battery status. If all four LEDs light up then the Power Pack is fully charged. Connect the retractable USB cable u to the mains power plug unit s. Connect the Mini USB plug connection attachment r to the other end of the retractable USB cable u. Plug the Mini USB plug connection attachment r into the socket INPUT DC 5 V 4 of the Power Pack. Connect the mains power plug unit s to a mains power wall socket. The mains power wall socket should be easily accessible so that, in the event of a malfunction, the power plug unit can be quickly pulled from it. The charging indicator 1 LEDs blink one after the other and thus indicate that the rechargeable battery is charging. If all of the charging indicator's 1 LEDs are constantly alight then the rechargeable battery is fully charged. Disconnect the Power Pack from the mains power plug unit s and pull the unit out of the mains power wall socket. NOTE ► You can also charge the Power Pack via the USB output of a PC/Notebook. Connect the appropriate plug connection attachment to the other end of the retractable USB cable u. Insert the plug connection attachment into the device's power supply socket. The device now receives its power supply from the Power Pack. If the device has a charging indicator this will show that the device is being charged. GB IE CY GB11108 9 GB IE CY NOTE Should the charging proccess not function as described try to reset the Power Pack to its factory default settings by pressing the RESET button 5. ► Carefully press the RESET button 5 with the help of a paper clip. The RESET button 5 is recessed to avoid an inadvertent resetting of the Power Pack. Troubleshooting Malfunction causes and remedies The following table will help with localizing and remedying minor malfunctions: Defect Possible cause The voltage of the device does not match that of the Power Pack. Defective connection between the device and the Power Pack. Solution Consult the operating instructions for the device. Make sure that the USB cable u is correctly connected to the device and the Power Pack. [. . . ] Check to see if the mains socket is providing electric power by connecting a different device to it. GB IE CY NOTE ► Should the malfunction not be resolved by the above mentioned solution proposals or if another type of malfunction occurs please contact our service department (see warranty and service). GB11108 11 GB IE CY Cleaning/Storage/Disposal Cleaning WARNING Disconnect the Power Pack, before cleaning and when not in use, from the mains power unit/car adapter, and from connected devices, to avoid the risk of an electric shock. ► For cleaning the outside of the Power Pack use a soft, lint-free cloth. [. . . ]