User manual BERNEX GB31206 CATALOGUE 2010

[. . . ] For more detailed information, please visit our website at http://www. gigabyte. com. 1 English 1 Check Supplied Items AC Adapter Battery Pack Manual Handy Bag (Optional) Power Cord Driver CD Global Warranty Card Stylus (Optional) * The illustrations in this document may appear differently from your model. 2 Using BERNEX Netbook for the First Time 1 2 To install the battery please follow these steps: 1 Insert the battery pack into the compartment. 2 Remember to slide the switch to the “Lock” position. 2 English 2 3 1 1 Connect the the power cord to the AC adapter. 2 Connect the AC adapter to the DC-in jack on the left side of the Netbook. [. . . ] 2 Connect the AC adapter to the DC-in jack on the left side of the Netbook. 3 Connect the power cord to the power outlet. Switching on the Power: After you turn on the GB31206 for the very first time, do not turn it off until the operating system has been configured. Please note that the volume for the audio will not function until Windows® Setup has completed. Booting Up the GB31206 for the First Time: Depending on your configuration, the Microsoft® Windows® Boot Screen will be the first screen that you will see as the netbook starts up. Follow the on-screen prompts and instructions and enter your personal information to complete the setup of the Windows® Operating System. Panoramic View 1 3 Your BERNEX Netbook Tour 3 English 1 Webcam 2 LED Indicators  3 Touchpad 4 LED Indicators  5 Microphone  5 4 Bluetooth Status Indicator Wireless LAN Status Indicator HDD Status Indicator Battery Status Indicator Power Status Indicator  Num. Lock Indicator Caps Lock Indicator 3. 5G Status Indicator(Optional) 3 2 Left View 1 External Display (VGA) Port 2 USB Port 3 Air Vent 4 HDMI Port 1 2 3 4 5 6 5 Headphone Jack 6 Microphone Jack 4 English Right View 1 Multi Card Reader  2 eSATA/USB Combo 3 USB Port 4 Power Button 1 2 3 4 5 6 5 Ethernet Port 6 DC-in Jack  Supports Secure Digital (SD), Multi Media Card (MMC), Memory Stick (MS), Memory Stick PRO (MS PRO) Card. Base View 1 1 Kensington Lock 2 Battery Bay 2 3 3 SIM card slot  4 Speakers  To insert of a mobile SIM card for 3. 5G function (Optional) 4 4 Hotkeys The computer employs hotkeys or key combinations to access most of the computer’s controls like screen brightness and volume output. To activate hotkeys, press and hold the <Fn> key before pressing the other key in the hotkey combination. Hotkey Fn+F1 Function Sleep Description Puts the computer in Sleep Mode. 5 English Fn+F2 Wireless LAN Enables/disables the Wireless LAN function. Fn+F3 Brightness Down Decrease the screen brightness. Fn+F4 Brightness Up Increases the screen brightness. Please be noted that the BERNEX Smart Recovery according to the default built-in version. 1. If the machine you purchase already has operating system built-in, you can restore the system back to factory default by using BERNEX Smart Recovery. Please be noted that the BERNEX Smart Recovery according to the default built-in version. 2. Please be noted that personal data will be lost after recovery, do remember to backup any data before operating this function. Therefore will briefly describe how to launch the Recovery Tool and to get the recovery started. 2. Turn the netbook on and press and hold the F9 key to launch the tool. 3. There shows the “Recovery” and “Exit” in Recovery System, click the “Recovery” to start the restore back to factory default. [. . . ] 2. Turn the netbook on and press and hold the F9 key to launch the tool. 3. There shows the “Recovery” and “Exit” in Recovery System, click the “Recovery” to start the restore back to factory default. 1 4. Recovery window shows the processing status. [. . . ]